[App_rpt-users] App_rpt-users Digest, Vol 69, Issue 28

Doug Crompton doug at crompton.com
Sun Nov 16 02:26:05 UTC 2014


Mark,

 Channel B but it only puts out what is on channel A so why have both. You could feed a monitor off of the same line as the TX input on channel A as long as you didn't load it. It seems silly to run two channels with the same audio. Just more work for the processor. Anyhow to answer your question, no, there is not any known problem with audio out on channel A. We all use it and it works. If you have two different FOBs that are doing the same thing I would check the audio path out of the FOB to the TX. My guess is that there is a problem there. Make sure you have channel A set to voice in simpleusb.conf.  That is where it defaults to so it should be right to begin with. 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Sat, 15 Nov 2014 11:09:04 -0500
From: mark at tinney.us
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 69, Issue 28

I have purchased a new URI from DMK and have the same problem, I plan to move it to channel B and see if it fails. I know enough about Linux to move around and execute files but wasn't sure if Asterisk was killing the channel and don't really know how to check.

Sent from my Verizon Wireless 4G LTE smartphone

-------- Original message --------
From: app_rpt-users-request at ohnosec.org 
Date: 11/15/2014  10:46  (GMT-05:00) 
To: app_rpt-users at ohnosec.org 
Subject: App_rpt-users Digest, Vol 69, Issue 28 

Send App_rpt-users mailing list submissions to
	app_rpt-users at ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
	app_rpt-users-request at ohnosec.org

You can reach the person managing the list at
	app_rpt-users-owner at ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Re: App_rpt-users Channel A audio lost (mark at tinney.us)
   2. Re: App_rpt-users Channel A audio lost (Doug Crompton)


----------------------------------------------------------------------

Message: 1
Date: Sat, 15 Nov 2014 09:30:12 -0500
From: <mark at tinney.us>
To: <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost
Message-ID: <A158DC121ED446D0BF82334CCD795451 at MkTinneyPC>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
	reply-type=original

I am not sure if this is how I get help but here is my question:

I have a BBB running and everything works fine until I eventually start 
getting a carrier only on channel A audio output, I have audio on channel B 
when A is not working as I have channel B setup as a monitor in the repeater 
building. Do you have any suggestions for me to try to figure out this 
problem?

Thanks,
Mark
W4GVX

-----Original Message----- 
From: app_rpt-users-request at ohnosec.org
Sent: Friday, November 14, 2014 12:00 PM
To: app_rpt-users at ohnosec.org
Subject: App_rpt-users Digest, Vol 69, Issue 26

Send App_rpt-users mailing list submissions to
app_rpt-users at ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
app_rpt-users-request at ohnosec.org

You can reach the person managing the list at
app_rpt-users-owner at ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Re: Echolink_and_app_rpt:_Looking_for_m
      ore_information_on_permit=*-* (ea8ee)
   2. Re: Echolink_and_app_rpt:_Looking_for_m
      ore_information_on_permit=*-* (Stephen Curtis)


----------------------------------------------------------------------

Message: 1
Date: Fri, 14 Nov 2014 09:41:18 +0000
From: ea8ee <ea8ee1 at gmail.com>
To: Robert Newberry <N1XBM at amsat.org>
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
ore_information_on_permit=*-*
Message-ID:
<CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

how active the vox mode in zoiper? maybe with a dmtf numbers?

2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org>:

> I think this has come up before,  but if you have a spare PC you can
> create a account on your box for zoiper set it for vox. Then get zello for
> PC and create a account for you node. Then create a channel for your node.
> Place the account into the repeater channel.  Use virtual audio cables and
> point zello to zoiper and cross the cables. Works slicker than sh*t!
> Obviously your zoiper connection is left up full time. Also I password
> protect my channel.
>
> Feel free to connect to my node and I'll give you a demo.
>
> We have a regular user who is over the road trucker and zello plays nice
> with his blue parrot headset also much more "PTT radio like" friendly.
> Also I can record repeater activity too!
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/d789b453/attachment-0001.html>

------------------------------

Message: 2
Date: Fri, 14 Nov 2014 10:07:56 +0000
From: Stephen Curtis <steve at m0hoy.com>
To: ea8ee <ea8ee1 at gmail.com>
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
ore_information_on_permit=*-*
Message-ID: <059961A7-71F7-452A-BA40-F53255E73CD4 at m0hoy.com>
Content-Type: text/plain; charset="iso-8859-1"

In extensions.conf final line add lowercase v after the P


> exten=00000,1,answer()
> exten=00000,n,Playback(rpt/node)
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(rpt/connected)

> exten=00000,n,rpt(0000|Pv)





> On 14 Nov 2014, at 09:41, ea8ee <ea8ee1 at gmail.com> wrote:
>
> how active the vox mode in zoiper? maybe with a dmtf numbers?
>
> 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org 
> <mailto:N1XBM at amsat.org>>:
> I think this has come up before,  but if you have a spare PC you can 
> create a account on your box for zoiper set it for vox. Then get zello for 
> PC and create a account for you node. Then create a channel for your node. 
> Place the account into the repeater channel.  Use virtual audio cables and 
> point zello to zoiper and cross the cables. Works slicker than sh*t! 
> Obviously your zoiper connection is left up full time. Also I password 
> protect my channel.
>
> Feel free to connect to my node and I'll give you a demo.
>
> We have a regular user who is over the road trucker and zello plays nice 
> with his blue parrot headset also much more "PTT radio like" friendly. 
> Also I can record repeater activity too!
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message to 
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down 
> to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message to 
> the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/244a0c78/attachment-0001.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 69, Issue 26
*********************************************



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4765 / Virus Database: 4189/8571 - Release Date: 11/14/14 



------------------------------

Message: 2
Date: Sat, 15 Nov 2014 10:46:40 -0500
From: Doug Crompton <doug at crompton.com>
To: "mark at tinney.us" <mark at tinney.us>
Cc: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost
Message-ID: <BLU172-W383F2071A0A71758BDCD29BA8D0 at phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"

Perhaps you have a bad USB FOB. Did you try another? Are you sure the sudio is not being interrupted outside of the FOB? Can you switch the channels physically outside the FOB?
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> From: mark at tinney.us
> To: app_rpt-users at ohnosec.org
> Date: Sat, 15 Nov 2014 09:30:12 -0500
> Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost
> 
> I am not sure if this is how I get help but here is my question:
> 
> I have a BBB running and everything works fine until I eventually start 
> getting a carrier only on channel A audio output, I have audio on channel B 
> when A is not working as I have channel B setup as a monitor in the repeater 
> building. Do you have any suggestions for me to try to figure out this 
> problem?
> 
> Thanks,
> Mark
> W4GVX
> 
> -----Original Message----- 
> From: app_rpt-users-request at ohnosec.org
> Sent: Friday, November 14, 2014 12:00 PM
> To: app_rpt-users at ohnosec.org
> Subject: App_rpt-users Digest, Vol 69, Issue 26
> 
> Send App_rpt-users mailing list submissions to
> app_rpt-users at ohnosec.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
> app_rpt-users-request at ohnosec.org
> 
> You can reach the person managing the list at
> app_rpt-users-owner at ohnosec.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
> 
> 
> Today's Topics:
> 
>    1. Re: Echolink_and_app_rpt:_Looking_for_m
>       ore_information_on_permit=*-* (ea8ee)
>    2. Re: Echolink_and_app_rpt:_Looking_for_m
>       ore_information_on_permit=*-* (Stephen Curtis)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Fri, 14 Nov 2014 09:41:18 +0000
> From: ea8ee <ea8ee1 at gmail.com>
> To: Robert Newberry <N1XBM at amsat.org>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
> ore_information_on_permit=*-*
> Message-ID:
> <CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> how active the vox mode in zoiper? maybe with a dmtf numbers?
> 
> 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org>:
> 
> > I think this has come up before,  but if you have a spare PC you can
> > create a account on your box for zoiper set it for vox. Then get zello for
> > PC and create a account for you node. Then create a channel for your node.
> > Place the account into the repeater channel.  Use virtual audio cables and
> > point zello to zoiper and cross the cables. Works slicker than sh*t!
> > Obviously your zoiper connection is left up full time. Also I password
> > protect my channel.
> >
> > Feel free to connect to my node and I'll give you a demo.
> >
> > We have a regular user who is over the road trucker and zello plays nice
> > with his blue parrot headset also much more "PTT radio like" friendly.
> > Also I can record repeater activity too!
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> > to the bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/d789b453/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 2
> Date: Fri, 14 Nov 2014 10:07:56 +0000
> From: Stephen Curtis <steve at m0hoy.com>
> To: ea8ee <ea8ee1 at gmail.com>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
> ore_information_on_permit=*-*
> Message-ID: <059961A7-71F7-452A-BA40-F53255E73CD4 at m0hoy.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> In extensions.conf final line add lowercase v after the P
> 
> 
> > exten=00000,1,answer()
> > exten=00000,n,Playback(rpt/node)
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(rpt/connected)
> 
> > exten=00000,n,rpt(0000|Pv)
> 
> 
> 
> 
> 
> > On 14 Nov 2014, at 09:41, ea8ee <ea8ee1 at gmail.com> wrote:
> >
> > how active the vox mode in zoiper? maybe with a dmtf numbers?
> >
> > 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org 
> > <mailto:N1XBM at amsat.org>>:
> > I think this has come up before,  but if you have a spare PC you can 
> > create a account on your box for zoiper set it for vox. Then get zello for 
> > PC and create a account for you node. Then create a channel for your node. 
> > Place the account into the repeater channel.  Use virtual audio cables and 
> > point zello to zoiper and cross the cables. Works slicker than sh*t! 
> > Obviously your zoiper connection is left up full time. Also I password 
> > protect my channel.
> >
> > Feel free to connect to my node and I'll give you a demo.
> >
> > We have a regular user who is over the road trucker and zello plays nice 
> > with his blue parrot headset also much more "PTT radio like" friendly. 
> > Also I can record repeater activity too!
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> > <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> >
> > To unsubscribe from this list please visit 
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> > <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll 
> > down to the bottom of the page. Enter your email address and press the 
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email 
> > confirmation. If you have trouble unsubscribing, please send a message to 
> > the list detailing the problem.
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit 
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down 
> > to the bottom of the page. Enter your email address and press the 
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email 
> > confirmation. If you have trouble unsubscribing, please send a message to 
> > the list detailing the problem.
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/244a0c78/attachment-0001.html>
> 
> ------------------------------
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> 
> End of App_rpt-users Digest, Vol 69, Issue 26
> *********************************************
> 
> 
> 
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4765 / Virus Database: 4189/8571 - Release Date: 11/14/14 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141115/3268a8a6/attachment.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 69, Issue 28
*********************************************


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141115/e2b83e87/attachment.html>


More information about the App_rpt-users mailing list