[App_rpt-users] Show link topology from cli?

[Tim Sawyer]

I don’t know of a way to print that to the console. There is a command to speak it. Have a look at cop 15 (v. cop 5). The horrid thing about this it can take a long time to read back all the connect nodes on even a reasonably small network. And worse, it will read back on all nodes with telemetry enabled (not just your node). 

fyi, cop (and all other) commands are listed in the comments at the top of rpt.c


--
Tim
:wq

> On Nov 16, 2014, at 8:24 PM, Bryan Fields <Bryan at bryanfields.net> wrote:
> 
> I know there is a bubble map that the stats.allstarlink.org <http://stats.allstarlink.org/> draws, but how can
> I get this data out of asterisk directly?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/15f4ecc6/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: app_rpt_comments.pdf
Type: application/pdf
Size: 27674 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/15f4ecc6/attachment.pdf>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/15f4ecc6/attachment-0001.html>