[App_rpt-users] Half duplex Tx override

[Steve Agee]

If COR is active, then it is assumed a user is talking in to your node 
radio to another station remotely. Please explain why it would be 
desirable to cut them off mid-sentence and have the node begin 
transmitting. Why would this be what you wanted to have happen?

N5ZUA

On 10/17/2014 11:19 PM, Willem Schreuder wrote:
> I have a half duplex node with COR and the behavior seems to be that 
> as lng as COR is active, it will not switch to transmit even if there 
> is an incomming transmission on the link.
>
> The behavior I would like to enable is that if there is an incoming 
> signal on the link, it should override the COR and switch to transmit.
>
> Is there a setting to allow this?
>
> 73 Willem
>
> ================================================================
> Dr. Willem A. Schreuder,  President,  Principia Mathematica
> Address:  445 Union Blvd, Suite 230,  Lakewood, CO  80228, USA
> Tel: (303) 716-3573   Fax: (303) 716-3575
> WWW: www.prinmath.com   Email: Willem.Schreuder at prinmath.com
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.