[App_rpt-users] Half duplex Tx override

[Jim]

Only if the node radio is full duplex.

73
Jim W7RY



-----Original Message----- 
From: Willem Schreuder
Sent: Friday, October 17, 2014 9:26 PM
To: Steve Agee
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Half duplex Tx override

On Fri, 17 Oct 2014, Steve Agee wrote:

> If COR is active, then it is assumed a user is talking in to your node 
> radio to another station remotely. Please explain why it would be 
> desirable to cut them off mid-sentence and have the node begin 
> transmitting. Why would this be what you wanted to have happen?

The radio is operating in SSB, so there is not a reliable detection of
incoming signal.  So the idea is to just have the node continuously feed
the rx audio into the link (it is a private node), and then you just
override it on Tx.

73 Willem

================================================================
Dr. Willem A. Schreuder,  President,  Principia Mathematica
Address:  445 Union Blvd, Suite 230,  Lakewood, CO  80228, USA
Tel: (303) 716-3573   Fax: (303) 716-3575
WWW: www.prinmath.com   Email: Willem.Schreuder at prinmath.com
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit 
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to 
the bottom of the page. Enter your email address and press the "Unsubscribe 
or edit options button"
You do not need a password to unsubscribe, you can do it via email 
confirmation. If you have trouble unsubscribing, please send a message to 
the list detailing the problem.