[App_rpt-users] Non Voting RTCM (just a basic node) On ExistingServer

[Jim Duuuude]

Yes, you need a voter.conf. Chan_voter will not work, or know what to do without it.

You dont really NEED the second and third entries, but if you put some in now,
you will have possibility for easy future expansion.

Jim WB6NIL

From: jimw7ry at gmail.com
To: tim.sawyer at mac.com
Date: Tue, 28 Oct 2014 21:35:29 -0700
CC: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Non Voting RTCM (just a basic node) On	ExistingServer






Thanks but not voting. Only one RTCM will be used. So I can eliminate the 
site 2 and 3 I assume? Do I need a voter.conf file?
Thanks
73
Jim W7RY
 


 

From: Tim Sawyer 
Sent: Tuesday, October 28, 2014 9:05 PM
To: Jim 
Cc: app_rpt-users at ohnosec.org 
Subject: Re: [App_rpt-users] Non Voting RTCM (just a basic node) On 
ExistingServer
 
Only 
one line changes in rpt.conf, the rxchannel= line. Like so: 

 
[1234]
rxchannel=Voter/1234
 
Then you need a voter.conf like so:
 
[general]

port = 667
password = BLAH
utos = 
y

buflen 
= 250


[1234]
Site1 
= passwd1,transmit
Site2 
= passwd2,transmit
Site3 
= passwd2,transmit
 
No, you don’t need a C-name for your server. Just a plain ‘ol dot notation 
IP works fine (i.e. 192.168.1.10)
 
Easy, no?


--
Tim
:wq
 


  On Oct 28, 2014, at 3:32 PM, Jim <jimw7ry at gmail.com> wrote:
   
  
  
  
  
  Gang...
  I have an existing server and node running on a PC at my repeater site. 
  The IP is static.
   
  I want to set up an RTCM at home that runs from the server described 
  above. Could someone please send me a rpt.conf file that has such a setup 
  please? Reading the
  RTCM manual, it’s looking for a DNS entry for the hosting server. I don’t 
  really need to use DNS if my server runs static IP? So any tips on setting up 
  the RTCM networking would be helpful too.
   
  I have moved the node from it’s own server to the server at the repeater 
  site on allstarlink.org.
   
  Hooking and interfacing to the radio is the EASY part. The config not so 
  much.
   
  Any help or tips would be appreciated!
   
  Thanks!
  73
  Jim W7RY
   
   _______________________________________________
App_rpt-users 
  mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To 
  unsubscribe from this list please visit 
  http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to 
  the bottom of the page. Enter your email address and press the "Unsubscribe or 
  edit options button"
You do not need a password to unsubscribe, you can do 
  it via email confirmation. If you have trouble unsubscribing, please send a 
  message to the list detailing the problem. 
 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141028/11bfe8da/attachment.html>