[App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4
pete M
petem001 at hotmail.com
Thu Sep 11 13:42:08 UTC 2014
well I think that Dahdi wont compile correctly on Any distro that have a kernel pass a certain point..
I can run the system on bunch of disto..
Here is the list..
CentOS 5 32bit
CentOS 5 64bit
CentOS 6 32bit
CentOS 6 64bit
CentOS 7 64bit
CentOS 7 64bit Minimal
Debian 6 32bit
Debian 6 64bit
Debian 7 32bit
Debian 7 32bit Minimal
Debian 7 64bit
Debian 7 64bit Minimal
Fedora 17 32bit
Fedora 17 64bit
Fedora 19 32bit
Fedora 19 64bit
Starbound-Ubuntu 13.10 32bit
SUSE 12.2 32bit
SUSE 12.2 64bit
Ubuntu 10.04 32bit
Ubuntu 10.04 64bit
Ubuntu 11.10 32bit
Ubuntu 11.10 64bit
Ubuntu 12.10 32bit
Ubuntu 12.10 64bit
Ubuntu 13.10 32bit
Ubuntu 13.10 64bit
Ubuntu 14.04 32bit
Ubuntu 14.04 32bit Minimal
Ubuntu 14.04 64bit
Ubuntu 14.04 64bit Minimal
So I have lots of choice
But I was under the feeling that the best distro was centos 5 for acid.. (using the install script from the cd..
Unless you can point me in another direction..
From: Doug Crompton
Sent: Wednesday, September 10, 2014 6:16 PM
To: pete M
Cc: app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4
Pete,
I have been somewhat following this. Does it have to be centos? Allstar will run on the latest Debian. You need to install it yourself but depending on your Linux capability it is not a big deal.
73 Doug
WA3DSP
http://www.crompton.com/hamradio
--------------------------------------------------------------------------------
From: petem001 at hotmail.com
To: kk6ecm at gmail.com; app_rpt-users at ohnosec.org
Date: Wed, 10 Sep 2014 14:12:38 -0400
Subject: Re: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4
Thanks Bob. I dont think that it has to do with something impossible to do.. In fact I have been searching the archives about problem like that.. And there was some answer about some patch to dahdi zaptel.. or such.. I am at work, dont remember..
If it would be installed at least up to a point. I would be able to do it..
I just dont know how to tell the compiler not to compile that part and go on..
--------------------------------------------------------------------------------
From: kk6ecm at gmail.com
Date: Wed, 10 Sep 2014 09:15:13 -0700
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4
Couple of thoughts. I've not been able to load using ssh. Last time I attempted this zaptel did not load properly, but it seems I didn't get an error until after the reboot. It seems to me (check the ACID scripts), that ACID disables ssh during the load. When I have loaded CentOS 5.10 (as previously mentioned), I then used some of the ACID scripts to load asterisk, etc, I always had to us a monitor and keyboard on the server to be fully successful. But hey... that could just be my fumbling around.
As for your stated concern. I could be because no one knows the answer. Hard to believe, I know, but it seems to happen occasionally on this list :~}
Thanks,
Bob
kk6ecm
Sent from iPad
On Sep 10, 2014, at 8:30 AM, pete M <petem001 at hotmail.com> wrote:
OK, did I asked a question that CAN’T be answered? Or did I asked the wrong way?
If I did I am sorry.. And I gave my apology to every one I could have offended..
But is it possible to at least have a small word from all those guru here if it can be done, and which way should I go? dont need to have someone holding my hand.. Just need to have a small Idea what to do..
Like just point me the pathway.. I will try to do it on my own..
Thanks
On Sep 9, 2014, at 11:13 AM, pete M <petem001 at hotmail.com> wrote:
I cant use the acid.iso cause the computer is in a remote place ( rented server) and they dont supply special OS installation. I can have fedore ubuntu centos on many flavor (x86 or 64 bit) and many revision... The problem is not the loading od the cd are other things like that..
I am sure that the kernel is too new and there is a part of zaptel that need a depricated fonction If I am not crazy..
From: kk6ecm
Sent: Tuesday, September 09, 2014 1:40 PM
To: APP RPT
Subject: Re: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4
I use this when ACID will not load, usually due to issues with BIO S and network drivers. I was assuming you were not able to get ACID to load on you computer. If your running phase2.sh was a second attempt after trying to load ACID, you may need to check that all the files are there because the load deletes some files. In short, if this occurred during an attempt to load the ACID download, I'd just try it again.
Thanks,
Bob
kk6ecm
Sent from iPad
On Sep 9, 2014, at 8:27 AM, pete M <petem001 at hotmail.com> wrote:
Ok will try that..
thanks!
From: Bob
Sent: Tuesday, September 09, 2014 10:55 AM
To: 'APP RPT'
Subject: Re: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4
I’ve done this several times without issue. Here are the steps I used.
Load CentOS 5.10 downloaded from CentOS website
No features, tools only, no desktop (competes with Asterisk)
Set ssh /etc/ssh/sshd_config
Run "setup" at comand line and disable firewall
vi /etc/rc.d/acidrepo
http://dl.allstarlink.org
Execute portion of ks.cfg, each line at a time
cp /etc/rc.d/rc.local /etc/rc.d/rc.local.orig
cat <<EOF >>/etc/rc.d/rc.local
cd /etc/rc.d; rm -f phase1.sh; wget -q http://dl.allstarlink.org/installcd/phase1.sh
chmod 755 /etc/rc.d/phase1.sh
/etc/rc.d/phase1.sh
Auto reboot after phase1.sh executed
phase2.sh runs automatically to completion
Bob
kk6ecm
--------------------------------------------------------------------------
From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of pete M
Sent: Tuesday, September 09, 2014 7:00 AM
To: APP RPT
Subject: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4
Need help to install an allstarlink node that wont have any radio on it in a data center to be my central reflector for my french network of repeater around Quebec Canada..
I did try to run phase2.sh from /etc/rc.d/ but this fail when compiling.
here is the out put from the script
sh phase2.sh
****** Phase 2 post install ******
Getting asterisk install script from http://dl.allstarlink.org../.
Getting files.tar.gz from http://dl.allstarlink.org../.
****** Asterisk Installation ******
/etc/rc.d/astinstall.sh: line 11: ntpdate: command not found
Unpacking files.tar.gz...
Compiling Zaptel...
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... gcc -E
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking for GNU make... make
checking for grep... /bin/grep
checking for sh... /bin/sh
checking for ln... /bin/ln
checking for wget... /usr/bin/wget
checking for grep that handles long lines and -e... (cached) /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for initscr in -lcurses... no
checking for initscr in -lncurses... no
checking for newtBell in -lnewt... no
checking for usb_init in -lusb... no
configure: creating ./config.status
config.status: creating build_tools/menuselect-deps
config.status: creating makeopts
config.status: creating build_tools/make_firmware_object
configure: *** Zaptel build successfully configured ***
make[1]: Entering directory `/usr/src/astsrc/zaptel/menuselect'
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for GNU make... make
checking for asprintf... yes
checking for getloadavg... yes
checking for setenv... yes
checking for strcasestr... yes
checking for strndup... yes
checking for strnlen... yes
checking for strsep... yes
checking for strtoq... yes
checking for unsetenv... yes
checking for vasprintf... yes
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for initscr in -lcurses... no
checking for initscr in -lncurses... no
checking for pkg-config... No
configure: creating ./config.status
config.status: creating makeopts
config.status: creating autoconfig.h
configure: configuring in mxml
configure: running /bin/sh './configure' --prefix=/usr/local 'CC=' 'LD=' 'AR=' 'CFLAGS=' --cache-file=/dev/null --srcdir=.
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for g++... no
checking for c++... no
checking for gpp... no
checking for aCC... no
checking for CC... no
checking for cxx... no
checking for cc++... no
checking for cl... no
checking for FCC... no
checking for KCC... no
checking for RCC... no
checking for xlC_r... no
checking for xlC... no
checking whether we are using the GNU C++ compiler... no
checking whether g++ accepts -g... no
checking for a BSD-compatible install... /usr/bin/install -c
checking for ranlib... ranlib
checking for ar... /usr/bin/ar
checking for cp... /bin/cp
checking for ln... /bin/ln< /font>
checking for mkdir... /bin/mkdir
checking for nroff... /usr/bin/nroff
checking for rm... /bin/rm
checking for strdup... yes
checking for vsnprintf... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating mxml.list
config.status: creating mxml.pc
config.status: creating config.h
configure: Menuselect build configuration successfully completed
make[1]: Leaving directory `/usr/src/astsrc/zaptel/menuselect'
make[1]: Entering directory `/usr/src/astsrc/zaptel/menuselect'
make[2]: Entering directory `/usr/src/astsrc/zaptel/menuselect'
gcc -g -c -D_GNU_SOURCE -Wall -c -o menuselect.o menuselect.c
gcc -g -c -D_GNU_SOURCE -Wall -c -o strcompat.o strcompat.c
gcc -g -c -D_GNU_SOURCE -Wall -c -o menuselect_stub.o menuselect_stub.c
make[3]: Entering directory `/usr/src/astsrc/zaptel/menuselect/mxml'
gcc -O -Wall -c mxml-attr.c
gcc -O -Wall -c mxml-entity.c
gcc -O -Wall -c mxml-file.c
gcc -O -Wall -c mxml-index.c
gcc -O -Wall -c mxml-node.c
gcc -O -Wall -c mxml-search.c
gcc -O -Wall -c mxml-set.c
gcc -O -Wall -c mxml-private.c
gcc -O -Wall -c mxml-string.c
/bin/rm -f libmxml.a
/usr/bin/ar crvs libmxml.a mxml-attr.o mxml-entity.o mxml-file.o mxml-index.o mxml-node.o mxml-search.o mxml-set.o mxml-private.o mxml-string.o
a - mxml-attr.o
a - mxml-entity.o
a - mxml-file.o
a - mxml-index.o
a - mxml-node.o
a - mxml-search.o
a - mxml-set.o
a - mxml-private.o
a - mxml-string.o
ranlib libmxml.a
make[3]: Leaving directory `/usr/src/astsrc/zaptel/menuselect/mxml'
gcc -o menuselect menuselect.o strcompat.o menuselect_stub.o mxml/libmxml.a mxml/libmxml.a
make[2]: Leaving directory `/usr/src/astsrc/zaptel/menuselect'
make[1]: Leaving directory `/usr/src/astsrc/zaptel/menuselect'
Generating input for menuselect ...
***********************************************************
The existing menuselect.makeopts file did not specify
that 'zttool' should not be included. However, either some
dependencies for this module were not found or a
conflict exists.
Either run 'make menuselect' or remove the existing
menuselect.makeopts file to resolve this issue.
***********************************************************
make: *** [menuselect.makeopts] Error 255
Failure: Unable to compile Zaptel 2
Fatal error: Unable to install Asterisk!
[root at node rc.d]#
I dont know where to go from there..
Anyone care to help a bit?
--------------------------------------------------------------------------
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
----------------------------------------------------------------------------
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
------------------------------------------------------------------------------
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140911/bc6d5fe3/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: wlEmoticon-winkingsmile[1].png
Type: image/png
Size: 1135 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140911/bc6d5fe3/attachment.png>
More information about the App_rpt-users
mailing list