[App_rpt-users] URI Problem
Doug Crompton
doug at crompton.com
Sun Sep 21 13:22:46 UTC 2014
Steve,
It sounds like it might be a SW issue in your PC. From what you say outside influences should reset the URI. Take a good look at your logs on the PC both system and Asterisk and see if you can determine anything.
73 Doug
WA3DSP
http://www.crompton.com/hamradio
Date: Sun, 21 Sep 2014 06:56:43 -0500
From: n9udo at yellowthunder.org
To: doug at crompton.com
CC: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] URI Problem
Doug.
I'm running a PC with usbradio.
This is something that just recently showed up. The system has
been running fine at it's current location for over a year. The
IBM PC that I'm using has a (heavy) metal chassis and I should be
able to get a good ground on it back to the building's halo.
Unplugging the URI and plugging back in does reset it. When it's
not working, the green LED is steady.
Thanks!
Amateur Radio - The Original Social Media
Steve Schulze - Radio Amateur, General Class - N9UDO
Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ
Administrator, Baraboo, Wisconsin AllStarLink Systems - 27616, 27727
Treasurer, Badgerland Amateur Television Society - KB9SFS
http://yellowthunder.org/dstar.html
On 9/20/2014 12:54 PM, Doug Crompton wrote:
Steve,
What computer are you using? PC or Beagle Bone Black? etc.
Also usbradio or simpleusb?
This is a common problem on the URI with external EMI and
power spikes.
The problem can be fixed. You need to ground everything and
eliminate EMI as much as possible.
The other issue is the USB not resetting when it has this
problem. Most of the PC's will but probably not all. The next
version of the BBB code coming out soon will reset fine.
If you are using simpleusb there is a bug in the code that
precludes a reset upon USB interruption. This fix will also be
in the BBB code that is coming soon. If you want to fix a PC
simplesusb installation here is the link -
http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/simpleusb-howto.pdf
See how to do the patch at the end of the pdf.
You should be able to pull the USB cable from the URI while in
use (green light flashing normally) and reinstall the USB and
it should start flashing again. If not then your system will
not recover from USB EMI hits properly.
It is always a good idea to try and fix or reduce the problem
because in severe cases it would be resetting all the time. It
sounds like you case is less severe.
73 Doug
WA3DSP
http://www.crompton.com/hamradio
> Date: Sat, 20 Sep 2014 12:24:15 -0500
> From: n9udo at yellowthunder.org
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] URI Problem
>
> Has anyone run across a URI that goes 'offline' every 3
to 4 days? A
> simple warm boot command or astres.sh will bring it back
on line as well
> as unplugging the URI and plugging back in.
>
> There is no indication that it's not working to the
online user. You can
> connect to the box but no audio (either direction) or PTT
passes to the
> repeater until you reset it.
>
> I have installed ferrites on each end of the USB cable
and on the
> control cable on the URI side but no change.
>
>
> Any thoughts?
>
>
> Thanks in advance.
>
> --
> Amateur Radio - The Original Social Media
>
> Steve Schulze - Radio Amateur, General Class - N9UDO
> Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ
> Administrator, Baraboo, Wisconsin AllStarLink Systems -
27616, 27727
> Treasurer, Badgerland Amateur Television Society - KB9SFS
>
> http://yellowthunder.org/dstar.html
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
scroll down to the bottom of the page. Enter your email
address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it
via email confirmation. If you have trouble unsubscribing,
please send a message to the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140921/6029f147/attachment.html>
More information about the App_rpt-users
mailing list