[App_rpt-users] Multiple nodes

Doug Crompton doug at crompton.com
Mon Sep 29 16:52:17 UTC 2014


Johnny,

  Well this is not a BBB problem but rather the fact that when using simpleusb you don't have the SW capability to eliminate it. I would say that someone is just too picky but if the tail is longer than normal then it can be a problem. The squelch tail source is the fault of the RX at the particular node it is coming from. Sometimes even with PL you need to adjust the squelch up because of PL shutdown delays and also local noise problems. It is more of a problem with some radios than others. We use the Alincos quites a bit and with them the squelch setting norm is anywhere from 4 to 7 and not the default 2.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> Date: Mon, 29 Sep 2014 08:11:15 -0700
> From: cypresstower at yahoo.com
> To: app_rpt-users at ohnosec.org; k5tra at austin.rr.com
> Subject: Re: [App_rpt-users] Multiple nodes
> 
> BBB has one problem, I get complaints about a squelch crash
> I'm about to install an audio delay board...
> JK
> --------------------------------------------
> On Sun, 9/28/14, k5tra <k5tra at austin.rr.com> wrote:
> 
>  Subject: Re: [App_rpt-users] Multiple nodes
>  To: app_rpt-users at ohnosec.org
>  Date: Sunday, September 28, 2014, 9:21 PM
>  
>  
>  
>  
>   
>   
>  
>  
>  
>  
>  
>  
>  
>  
>  
>  
>  Chuck, 
>  
>  Actually, BBB for $55, uSD
>  16GB for $8 and  USB FOB
>  (modified) for $12 is well under $100 for a very good
>  node. 
>  
>  Tom / K5TRA 
>  
>  
>  
>  
>  
>  
>  -----Inline Attachment Follows-----
>  
>  _______________________________________________
>  App_rpt-users mailing list
>  App_rpt-users at ohnosec.org
>  http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>  
>  To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>  and scroll down to the bottom of the page. Enter your
>  email address and press the "Unsubscribe or edit options
>  button"
>  You do not need a password to unsubscribe, you can do it via
>  email confirmation. If you have trouble unsubscribing,
>  please send a message to the list detailing the problem.
>  
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140929/f51356af/attachment.html>


More information about the App_rpt-users mailing list