[App_rpt-users] Correct Wiring For The URIx Diagnostic Dongle

[John C. Westmoreland, P.E.]

Hello All,

Here is the wiring instructions from the FAQ:

Pin 1 to Pin 7
Pin 2 to Pin 3
Pin 4 to Pin 8
*Pin 23 to Pin 24*
10K Resistor between Pins 21 and 22
10K Resistor between Pins 21 and *23*
For URIx (CM119) only, also include the following connections:
Pin 5 to Pin 10
Pin 6 to Pin 11

>From uridiag:

Enter your selection:c
Special Test Cable Pinout:

25 pin D-shell connector
  Pin 1 to Pin 7
  Pin 2 to Pin 3
  Pin 4 to Pin 8
 * Pin 11 to Pin 24*
  10K Resistor between Pins 21 & 22
  10K Resistor between Pins 21 & 23
  For URIx (CM119), also include the following:
  Pin 5 to Pin 10
  Pin 6 to Pin* 11*
  Do *NOT* include these for the standard URI!!

So, which one of these do I use?

73's,
John
AJ6BC
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150812/d9662f3e/attachment.html>