[App_rpt-users] Correct Wiring For The URIx Diagnostic Dongle

[John C. Westmoreland, P.E.]

Barry,

Look here: http://svn.ohnosec.org/svn/projects/allstar/ .
Latest uridiag is there.

73's,
John
AJ6BC
On Aug 15, 2015 13:30, "Barry" <g8sau at sidx.org.uk> wrote:

> At 21:17 14/08/2015, Doug Crompton wrote:
>
>> Also note you do not need external 12V for the additional op-amp. It will
>> work on 5V from the URI as long as you do not exceed the P-P output for
>> that voltage which would probably be somewhere around 2V P-P. You obviously
>> could get more swing running it on 12V but if you don't need it, it works
>> fine on 5V.
>>
>
> All Interesting stuff but where to find uridiag ? program its not on ACID
> dist?
> and not on my RasPI-2 dist?
>
> is this something that on the dmk site ? I have 6 URI's but never seen
> this tool?
>
> Barry
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150815/1bac67e7/attachment.html>