[App_rpt-users] Allstar

kk6ecm kk6ecm at gmail.com
Thu Aug 27 02:23:00 UTC 2015


You may have a USB pointing problem between asterisk and Linux.

On boot up type "service asterisk stop" at the command prompt

Type lsusb at the command prompt. 

[root at Xxxxxx~]# lsusb
Bus 004 Device 004: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller
Bus 004 Device 001: ID 0000:0000  
Bus 004 Device 002: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller
Bus 001 Device 001: ID 0000:0000  
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
Bus 005 Device 001: ID 0000:0000  

Then make sure your tune files ( in /etc/asterisk) properly point to your USB device such as a URI in devstr=  (see below example)

[root at xxxxx asterisk]# cat usbradio_tune_usb<node#>.conf
[usb27178]
; name=usb<node#>
; devicenum=1
devstr=4-2    ; Bus 004 Device 002: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller
rxmixerset=125
txmixaset=500
txmixbset=500
rxvoiceadj=1.820479
rxctcssadj=0.500000
txctcssadj=0
rxsquelchadj=825

Correct the tune file then

At the command prompt type: service asterisk start

Thanks,
Bob
kk6ecm

Sent from iPad


> On Aug 26, 2015, at 5:48 PM, chris <ckw at gci.net> wrote:
> 
> Hello Again. I failed to mention The Allstar server is running ACID. After boot up It repeats the following ,
> (asterisk) did not claim interface 3 before use. Forgot where to fix this. Thanks again. 
> 
> Chris
> Allstar node 42264 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 



More information about the App_rpt-users mailing list