[App_rpt-users] Noob problems with DIAL installation

[Steve Zingman]

Use the same login you use to login to the Portal. The call sign is in 
caps, (at least mine is).

73, Steve N4IRS


On 11/30/2015 10:09 PM, Greg Mohr wrote:
>
> I am new to Linux after about 20 yrs away from programming  on it.  I 
> installed the image cleanly and was able to logon and change the 
> password, set a new hostname, and a static IP to match port forwarding 
> on my firewall.  I then get prompted to enter my Allstar id and 
> password…that’s the point I cannot get past.  I am registered and 
> online on the website fine, my node shows up in a greyed out box in 
> the all nodes list.  But on the DIAL install, I enter my id and 
> password ankeep getting prompter to reenter the password over & over 
> until it fails.  I have tried using my website ID and password combo, 
> the node and website password combo, the node and pin combo, nothing 
> works and it is the same, the system reprompts for the password 
> adinifnitum.
>
> I have reinstall the DIAL at least 10 times so far and reached a level 
> of frustration as to where to go next…help!
>
> Thank you
>
> Greg
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151201/7ac317a7/attachment.html>