[App_rpt-users] RPI2 DIAL

[Corey Dean]

Log in to the pi2 and do an uptime.  That will tell you how long it has been powered up.

Sent from my iPhone

> On Dec 8, 2015, at 9:27 AM, Robert Newberry <N1XBM at amsat.org> wrote:
> 
> Any suggestions on places to look if my node is resetting. Two things are happening. I run two nodes on one server. One of those nodes is permanently connected to the other. Then the other node is permanently to a remote hub.
> 
> So sometimes my nodes briefly disconnect and reconnect. When I look in allmon2 I see that everything reconnected on their own leading me to believe the network briefly dropped.
> 
> The second scenario is my node isn't connected leading me to believe a reboot happened.
> 
> I realize I can run a macro to automatically connect when it powers up. What I'd like to know is something happening with the power at the site or is my RPI2 having a problem. The site owner says no this happening. Although he has no indication is he is losing power or network.
> 
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812, 42086
>    
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151208/7d2d17c4/attachment.html>