[App_rpt-users] SIP CT

[Mike - W5JR]

The stations down link have the usual CTs, but the node the SIP is connected to doesn't. I'm intuiting the workaround is to have an intervening node. I've not implemented this for my connection but sounds like a good test. 

tnx
Mike / W5JR
Alpharetta GA

> On Dec 17, 2015, at 5:02 PM, Mike M <kf7mbk at w7ara.net> wrote:
> 
> When you "unkey" from the SIP side, I want a CT to come out on the radio. I can see what you mean about not needing a CT out of the SIP side.  But when apt_rpt unkeys the radio, whether from a link or SIP, I would think it should generate a CT on the radio. Whether that's the logic in the code, I don't know.
> 
> I'll play around with it tonight, maybe take a look through the code.
> 
> 
> 
> 
> 
> 
> Regards,
> Mike Montalvo, KF7MBK
> ARA Membership Chair
> www.w7ara.org
> 
> 
> 
> 
> 
> 
>> On Thu, Dec 17, 2015 at 11:22 AM, <mike at midnighteng.com> wrote:
>> Ken your right, no sip ct.
>> Feeling a bit stupid after testing mine that I have not used in years, it does not
>> trip CT either.
>> I 'think' because it does not trip the COR code. It bypasses it. Could be for good
>> reason?
>> 
>> Echolink connections are full duplex. A requirement of the host.
>> ELink user can key-up and rptr users can converse with him without him ever
>> unkeying until rptr time-out. Same with SIP.
>> I don't feel it's pointless to have a CT at the end of any tx on a repeater.
>> 
>> But since most just use it for sysop testing and monitoring, no big deal.
>> 
>> ...mike/kb8jnm
>> 
>> > I don't think SIP has a CT.
>> > SIP connections are full duplex; it's pointless to have an "over" beep.
>> >
>> > 73
>> > Ken
>> >
>> >
>> > -----Original Message-----
>> > From: app_rpt-users-bounces at ohnosec.org
>> > [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of
>> > app_rpt-users-request at ohnosec.org
>> > Sent: Thursday, December 17, 2015 12:00 PM
>> > To: app_rpt-users at ohnosec.org
>> > Subject: App_rpt-users Digest, Vol 82, Issue 39
>> >
>> > Send App_rpt-users mailing list submissions to
>> >       app_rpt-users at ohnosec.org
>> >
>> > To subscribe or unsubscribe via the World Wide Web, visit
>> >       http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> > or, via email, send a message with subject or body 'help' to
>> >       app_rpt-users-request at ohnosec.org
>> >
>> > You can reach the person managing the list at
>> >       app_rpt-users-owner at ohnosec.org
>> >
>> > When replying, please edit your Subject line so it is more specific than
>> > "Re: Contents of App_rpt-users digest..."
>> >
>> > _______________________________________________
>> > App_rpt-users mailing list
>> > App_rpt-users at ohnosec.org
>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> >
>> > To unsubscribe from this list please visit
>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
>> > bottom of the page. Enter your email address and press the "Unsubscribe or edit
>> > options button"
>> > You do not need a password to unsubscribe, you can do it via email confirmation. If
>> > you have trouble unsubscribing, please send a message to the list detailing the
>> > problem.
>> >
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151217/8c0fa94f/attachment.html>