[App_rpt-users] Garmin GPS 18 LVC RTCM wiring

[Skyler F]

Nevermind, I found this on the archives, I am going to use this

    RTCM   GPS 18x LVC      6 GRX <-- Rx Data 6 Green  7 GPPS <-- Pulse
Output 1 Yellow  8 GND   Ground 3 Black  8 GND   Ground 5 Black  13 +5V -->
Vin 2 Red  14 GTX --> TX Data 4 White




On Fri, Dec 18, 2015 at 2:00 PM, Skyler F <electricity440 at gmail.com> wrote:

> Thanks, Do you think I am right on the everything else, the GRX and the
> GTX ( does rx connect to tx or does rx connect to rx)
>
> On Fri, Dec 18, 2015 at 1:51 PM, Steven Donegan <donegan at donegan.org>
> wrote:
>
>> The GPPS is likely designed to connect to a GPS Pulse Per Second - which
>> is likely the measured pulse thing...
>>
>> Caveat - I know nothing about the RTCM, but I do know some about
>> interfacing GPS modules for other purposes.
>>
>> Steven Donegan
>> KK6IVC General Class FCC License
>> PP-ASEL
>> Silver State Car #86
>> www.sscc.us
>>
>> ------------------------------
>> *From:* Skyler F <electricity440 at gmail.com>
>> *To:* "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
>> *Sent:* Friday, December 18, 2015 12:47 PM
>> *Subject:* [App_rpt-users] Garmin GPS 18 LVC RTCM wiring
>>
>> I am now going to solder the Garmin 18x GPS to the DB15 connector for the
>> RTCM.
>>
>> I am a little confused by the labels so is this pinout correct?
>>
>> RTCM  ---  GPS
>>
>> GRX  ----- TXD
>> GPPS ----
>> GND ------ GND
>> +5V   ----- Input Voltage
>> GTX  ----- RCV
>> RST  -----
>>
>> Is this correct? There is also a "measurement Pulse Output" wire, but I
>> don't know what to do with that.
>>
>> Garmin GPS 18 wiring
>>
>> http://wiki.elphel.com/images/thumb/f/fb/Garmin_gps18x_wiring.jpeg/500px-Garmin_gps18x_wiring.jpeg
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> and scroll down to the bottom of the page. Enter your email address and
>> press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>
>
> --
> Skyler Fennell
> amsatnet.info
> KDØWHB
> electricity440 at gmail.com
>



-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151218/7520449a/attachment.html>