[App_rpt-users] 2 nodes setup to auto connect don't seem to work

[Doug Crompton]

Mike,

 It was not clear from your statements if you were ever able to connect them or if the script was the problem. If its two (or more) nodes on the same LAN on different computers (servers) they would need routing information in the nodes section of rpt.conf so they connect locally and do not try and use the public IP. You would need to do this on both servers. They should also be on different ports setup at allstarlink.org

[nodes]
; Note, if you are using automatic update for allstar link nodes,
; no allstar link nodes should be defined here. Only place a definition
; for your local nodes, and private (off of allstar link) nodes here.

40000 = radio at 127.0.0.1/40000,NONE
40001 = radio at 192.168.1.100:4568,NONE    <<<< IP and port of other local server
On the other server it would be just reversed with the other nodes port. 4569 is default but shown here for clarity.

40001 = radio at 127.0.0.1/40000,NONE
40000 = radio at 192.168.1.100:4569,NONE    <<<< IP and port of other local server

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Mon, 9 Feb 2015 12:11:04 -0500
From: mike.lussier at gmail.com
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] 2 nodes setup to auto connect don't seem to work

Good afternoon all, 
I have two nodes on my internal network. both on the same subnet. for the past 16 hours if I look at either node that show state as "Connecting" and not connected . 

Any thoughts ? I tried it once from one node running a script and before I went to bed last night I tried it from the other side. 


Mike AE4ML
-- 
"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan





_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150209/956711fa/attachment.html>