[App_rpt-users] 2 nodes setup to auto connect don't seem to work

[Ken]

I can get “connecting” if the target system is in a mode that does not accept new connections.  This has happened when I was running a bulletin where the script got interrupted and never put things back in the normal mode.

 

73

Ken

 

From: Mike Lussier [mailto:mike.lussier at gmail.com] 
Sent: Monday, February 09, 2015 12:11 PM
To: ALL STAR
Subject: [App_rpt-users] 2 nodes setup to auto connect don't seem to work

 

Good afternoon all, 

I have two nodes on my internal network. both on the same subnet. for the past 16 hours if I look at either node that show state as "Connecting" and not connected . 

Any thoughts ? I tried it once from one node running a script and before I went to bed last night I tried it from the other side. 



Mike AE4ML



-- 

"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150209/8ae8d0e5/attachment.html>