[App_rpt-users] Simplex node - prevent tx while local traffic is going on...

[Skyler F]

Make sure linktolink=yes is not active. I have linktolink=yes on my node
because it is half duplex. The only disadvantage is that people will get
walked on.



On Fri, Feb 20, 2015 at 10:41 PM, Tim Sawyer <tim.sawyer at mac.com> wrote:

> Duplex=1 in rpt.conf is supposed to do that what you want.  That is, with
> a simplex node a signal from another node will not key the local node if
> there is a signal on it's receiver.
>
> On the other hand a remote base is supposed to give TX priority to the
> linked node. So a signal from the other node will key the local node even
> when there is a signal on it’s receiver.
>
> You don’t have the remote base mode set by chance, do you?
> --
> Tim
> :wq
>
> On Feb 20, 2015, at 7:22 PM, Mark Johnston <markjohnston73 at gmail.com>
> wrote:
>
> Hello,
>
> Does anyone know a/the setting to prevent TX while a local station is
> transmitting - example
> between network traffic, being able to key up and enter a command without
> being walked on, assuming one gets into the node before the remote station
> transmits of course.
>
> Tried changing usbradio.conf duplex = 0
> did not help -
>
> rpt.conf is set to duplex = 1
>
>
> Thanks,
>
> Mark KC7DMF
>  _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150222/8c31c786/attachment.html>