[App_rpt-users] new simplex node, can't connect in transceive mode

[Elden Fenison]

I'm afraid I don't know how to control the CTCSS filtering. I thought CTCSS
controlled the interaction between radios. I totally don't get all the
references to it in the config files or why asterisk has anything to do
with that. But there is obviously a lot I don't know.

On Sat Jan 10 2015 at 7:02:24 AM Tim Sawyer <tim.sawyer at mac.com> wrote:

> I would add one thing to what Doug said. Make sure you have CTCSS
> filtering. PL really messes with TT decoding.
> --
> Tim WD6AWP
>
> On Jan 9, 2015, at 8:33 PM, Doug Crompton <doug at crompton.com> wrote:
>
> Elden,
>
> Before you do anything make sure the rig you are transmitting the DTMF
> from is doing it correctly and the TX levels are good. Substitute another
> rig if you can.
>
>  This is almost always caused by equalization or level problems.
>
> First of all make sure your levels are correct. If they are then:
>
> Allstar can use either flat (non pre/deemphasized) or pre/deemphasized
> audio. Depending on what radio you are using and how you have it connected
> would determine how to set this in the configuration file. If you are using
> simpleusb take the audio from the pre/deemphasized points. This can get a
> little complicated for a beginner so if you need more explanation let me
> know.
>
> The bottom line is if you are pre/deemphasizing in the radio then you
> don't want to do it again in the SW.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> From: w7ldn at w7ldn.com
> Date: Sat, 10 Jan 2015 03:48:00 +0000
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] new simplex node, can't connect in transceive
> mode
>
> Found a clue on this...
>
> It appears that asterisk is not able to properly interpret a '3' DTMF tone
> in my particular setup. Below is part of my log, where I keyed 123456789
> 123 123. You will see that there are no threes. Wonder what is up with that?
>
> [Jan  9 19:32:23] NOTICE[25376] chan_usbradio.c: Got DTMF char 1 duration
> 319 ms
> [Jan  9 19:32:24] NOTICE[25376] chan_usbradio.c: Got DTMF char 2 duration
> 320 ms
> [Jan  9 19:32:26] NOTICE[25376] chan_usbradio.c: Got DTMF char 4 duration
> 278 ms
> [Jan  9 19:32:26] NOTICE[25376] chan_usbradio.c: Got DTMF char 5 duration
> 276 ms
> [Jan  9 19:32:27] NOTICE[25376] chan_usbradio.c: Got DTMF char 6 duration
> 235 ms
> [Jan  9 19:32:28] NOTICE[25376] chan_usbradio.c: Got DTMF char 7 duration
> 277 ms
> [Jan  9 19:32:29] NOTICE[25376] chan_usbradio.c: Got DTMF char 8 duration
> 256 ms
> [Jan  9 19:32:30] NOTICE[25376] chan_usbradio.c: Got DTMF char 9 duration
> 256 ms
> [Jan  9 19:32:44] NOTICE[25376] chan_usbradio.c: Got DTMF char 1 duration
> 213 ms
> [Jan  9 19:32:44] NOTICE[25376] chan_usbradio.c: Got DTMF char 2 duration
> 213 ms
> [Jan  9 19:32:46] NOTICE[25376] chan_usbradio.c: Got DTMF char 1 duration
> 276 ms
> [Jan  9 19:32:46] NOTICE[25376] chan_usbradio.c: Got DTMF char 2 duration
> 255 ms
>
> On Fri Jan 09 2015 at 8:10:52 AM Elden Fenison <w7ldn at w7ldn.com> wrote:
>
> Greetings,
>
> I just setup a new simplex node (first time). I'm using the URI and a
> cable that I bought that should work with my Yaesu FT-7900. I did the radio
> tuning. I don't have a service monitor, so I did the best I could.
>
> The problem I'm having is... I can make outbound connections to systems in
> monitor mode, but I seem to be unable to connect in transceive mode. When I
> try to connect in monitor mode, I get instant feedback saying I'm
> connected. When I try to connect in transceive mode, I get nothing at all.
>
>
> _______________________________________________ App_rpt-users mailing list
>  App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
> from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button" You do not need a password to
> unsubscribe, you can do it via email confirmation. If you have trouble
> unsubscribing, please send a message to the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150111/70d43248/attachment.html>