[App_rpt-users] private nodes not connecting

[Jon Rorke]

This works as long as the 2 nodes are static IPs right? If the nodes are 
set for DHCP then it might get a different IP from the router and then 
the other node cant find it.
Just my 1.5 cents. (2 cents CDN)

VA3RQ
On 1/28/2015 12:10 AM, Tim Sawyer wrote:
> In rpt.conf you have to put the IP address and port of the other 
> node(s) in your private network. Not sure I have your IPs right but...
>
> One node would look something like this:
> [nodes]
> ; Note, if you are using automatic update for allstar link nodes,
> ; no allstar link nodes should be defined here. Only place a definition
> ; for your local nodes, and private (off of allstar link) nodes here.
> 1200 = radio at 127.0.0.1 <mailto:radio at 127.0.0.1>:4570/1200,NONE         
>         ; Local node
> 1003 = radio at 10.205.1.25 <mailto:radio at 10.205.1.25>:4570/1003,NONE     
>           ; Remote Node
>
>
> The other node like this:
> [nodes]
> ; Note, if you are using automatic update for allstar link nodes,
> ; no allstar link nodes should be defined here. Only place a definition
> ; for your local nodes, and private (off of allstar link) nodes here.
> 1003 = radio at 127.0.0.1 <mailto:radio at 10.205.1.25>:4570/1003,NONE     ; 
> Local Node
> 1200 = radio@ <mailto:radio at 127.0.0.1>10.204.2.7:4570/1200,NONE     ; 
> Remote node
>
> Hope that helps you get some sleep :-)
> --
> Tim
> :wq
>
>> On Jan 27, 2015, at 3:53 PM, Serge Bérubé <ve2abc at ve2abc.com 
>> <mailto:ve2abc at ve2abc.com>> wrote:
>>
>> HI ! ,
>> I have trouble connecting private nodes across routers . We have 
>> nodes 1003 and node 1200  , each on a different router on an 
>> intranet  linked with many Ubiquiti radios on 5 ghz band. We use WDS  
>> on all radios , and the routers are Mikrotik RB-750 and Rb-2011 all 
>> updated to the latest firmware ( 6.25) from both locations we could 
>> ping  the remote Asterisk machine and we can SSH or WEBMIN in it, no 
>> issues ! I am using port UDP 4570 on both, I am sure about my DST 
>> rules  in routers , and my routes are declared. So I can pass 
>> traffic  from one lan to the other with no issues. I f I check with 
>> SSH while I try to connect from the remote node, I could see a 
>> WARNING [2421] app_rpt.c:17811 rpt_exec; Node 1200 IP 10.204.2.7 does 
>> not match link Ip 10.205.1.25!!     .  What it means for me is that 
>> the machine received an answer to the connect request  with the 
>> router`s  physical L3 address of the used port instead of the address 
>> of the Asterisk remote box…
>> Such is a router ! it packs the info with the source address of the 
>> router… Is there a location in Asterisk where we could  instruct the 
>> machine to listen to any address ? or may be someone knows a 
>> workaround… I worked around 150 hours to  resolve this issue , with 
>> no success . Help me please, I do not sleep since many nights !
>> Thanks for your help, Serge VE2ABC  tech. director aresqc.org 
>> <http://aresqc.org/>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please 
>> visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-usersand 
>> scroll down to the bottom of the page. Enter your email address and 
>> press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150128/979a4880/attachment.html>