[App_rpt-users] usbradio setting to delete tail repeater

[Geoff]

On 01/27/2015 08:43 AM, ea8ee wrote:
> hello everyone! I tried to configure your rig kenwood V7 and uri dmk
> connected to our repeater that has a tail using the CTSS tail repeater
> is not heard using the usbradio setting using carrierfrom = dsp works
> but the problem that some users using the same CTSS  open the rx
> access and another users not get to be heard through the dsp uri  
> any option to use the rx CTSS V7 to delete tail repeater instead of
> dsp uri ?

I'm using a TM-V7A as well, but it's only a 2m node, and simplex as
well.  Connected the DMK URI to the packet port.  Discriminator audio
(9600 baud line) available for flat audio!  Sounds awesome!

As for turning off the tail on the allstar machine, look at the duplex
modes...


  duplex=

Submitted by hwstar on Sun, 05/17/2009 - 14:13

This configuration option tells app_rpt how to handle audio passed
through the radio interface. Please note that it does not perform the
same function as the duplex= configuration option in the configuration
file usbradio.conf. In rpt.conf, duplex= can be set to one of 5
different modes:

Mode 	Description
0 	Half duplex with no telemetry tones or hang time. Special Case: Full
duplex if linktolink is set to yes. This mode is preferred when
interfacing with an external multiport repeater controller.
1 	Half duplex with telemetry tones and hang time. Does not repeat
audio. This mode is preferred when interfacing a simplex node.
2 	Full Duplex with telemetry tones and hang time. This mode is
preferred when interfacing a repeater.
3 	Full Duplex with telemetry tones and hang time, but no repeated audio.
4 	Full Duplex with telemetry tones and hang time. Repeated audio only
when the autopatch is down.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150128/aaab6e1b/attachment.html>