[App_rpt-users] dtmf *4 Command mode

[Barry]

At 20:09 28/07/2015, Corey Dean wrote:
>Here is how I do it.  From a node I will issue a *4 and the node number I 
>want to control.  You will then get an audio announcement.  Then from this 
>point on the commands entered will work on the other node.  When you are 
>done doing the remote control just key up and hit a #.  You will get the 
>confirmation beep an you are done.


Okay sound good. just tested this but i never get a connect to the remote node.
I can do *3<remote_node> and that links up fine
but *4<remote_node> fails to connect ?
is there anything that I should add to rpt.conf

and thanks for the fast reply nice.

Barry



>Corey N3FE
>
>Sent from my iPhone
>
> > On Jul 28, 2015, at 3:05 PM, Barry <g8sau at sidx.org.uk> wrote:
> >
> > Hi
> >
> > I have read the http://ohnosec.org/drupal/node/21  pages but could do 
> with a simple
> > tutorial on how to send a command to a remote node
> >
> > I guess its something like
> >
> > *4 <local_node> # <remote_node> *<remote_command>
> >
> > This is just a guess I want to with dtmf on rf send command *51 to a 
> remote node while transmitting to my local RF node
> >
> > can that be done and how ?
> >
> > Thanks Barry
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down 
> to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message to 
> the list detailing the problem.
>
>
>-----
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 2015.0.6086 / Virus Database: 4401/10323 - Release Date: 07/28/15