[App_rpt-users] enabling courtesy tones

[Steve Agee]

you don't have them disabled with a line reading:

[2433]
nounkeyct=1

do you?

N5ZUA

On 7/28/2015 11:37 PM, KD8USF wrote:
> I've tried to enable the courtesy tones but nothing happens, is there 
> a line I need to add to the config to enable it? I'm just trying to 
> use the defaults to start with.
>
> These lines are uncommented:
>
> unlinkedct=ct2
> remotect=ct3
> linkunkeyct=ct8
>
> The only tone that does work is the command tone...
>
> Thanks.
> Andrew.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150729/40ca5434/attachment.html>