[App_rpt-users] RTCM Network Duplex Mismatch

[Jesse Lloyd]

Hey All,

I'm having some issues trying to get my server talking to my RTCM without creating a duplex mismatch. I have 2 nics on my server, eth1 connects to my MAN which has my Rx only voter sites on it, and eth0 has a cross over cable and connects directly to my master / Tx site. 

I've been using ethtool to set and see the port settings for eth0, and when I set the RTCM to half and eth0 to autoneg it fails autoneg and defaults to 10 half. So this should work, but ethtool shows a bunch of Rx CRC errors indicating a link speed mismatch. 

If I change the RTCM to full duplex, I'd expect problems, but I don't see any Rx CRC errors and everything seems to work fine. 

Question is, is there a diagnostic screen or debug level in the RTCM that will show my ethernet Rx errors / CRC errors? Has any one else come across weirdness with the RTCM and duplex mismatches?

Feature wish: 100 Mbps autoneg for the RTCM, lol. 

Thanks,

Jesse
VE7LYD