[App_rpt-users] GPIO Timeouts

[Sam Nabkey]

I ran this and it works for me...

Copy it into a file.  directions included...

#!/bin/bash

# Timed script for GPIO Control
# k8sn at k8sn.org
# filename: /etc:asterisk/local/gpio_pusle.sh

# After saving the file, make sure the file is able to be executed:

#chmod 0755 /etc/asterisk/local/gio4_pulse.sh

# Replace xxxx with your node number

#use any TT command in your rpt.conf file to start the timed output for
example:
#9681= cmd,/etc/asterisk/local/gpio_pulse.sh

# This is the actual file:

# First we turn on the gpio4 and announce to the users:
/usr/bin/asterisk "rpt cmd xxxx cop 61,gpio4=1 0"
sleep 5
/usr/bin/asterisk "rpt localplay xxxx /etc/asterisk/local/gpio4_on"

# Now we wait for 30 minutes:
sleep 30m

# Now we shut it back off and announce to the users:
/usr/bin/asterisk "rpt cmd xxxx cop 61,gpio4=0 0"
sleep 5
/usr/bin/asterisk "rpt localplay xxxx /etc/asterisk/local/gpio4_off"

exit 0

# Works good for me. however, your mileage may vary.. contents may be HOT!



On Sun, Jun 14, 2015 at 11:26 AM, Barry <g8sau at sidx.org.uk> wrote:

> At 15:53 14/06/2015, mike at midnighteng.com wrote:
>
>  Barry,
>>
>> I wrote a little script to do what you want.
>>
>> macro you want to call to turn it off after the timer has elapsed.
>>
> Thanks...
>
> The script works fine on its own I can run it on the UNIX Cmd Line> thats
> fine.
> I dont think the cmd, ... is being executed from inside asterisk I have
> added
> this to the rpt.conf
>
> maybe I put the call in the wrong place.?
>
>
> [functions28203]
> 1=ilink,1
> 2=ilink,2
> 3=ilink,3
> 4=ilink,4
> 5=macro,1
> 70=ilink,5
> 71=ilink,6
> 72=ilink,7
> 73=ilink,15
> 74=ilink,16
> 75=ilink,8
>
> 80=status,1
> 81=status,2
>
> ;
> ; Control GPIO Port 1 on URI FOB db25.Pin2
> C90=cop,61,GPIO1=1 ; Turn on GPIO 1
> C91=localplay,/var/lib/asterisk/sounds/enabled
> C92=cop,61,GPIO1=0 ; Turn off GPIO 1
> C93=localplay,/var/lib/asterisk/sounds/disabled
> ;
> C94=cmd,/etc/asterisk/myscripts/macro-timer.sh
> ;
> ;
> 6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000  ; Autopatch up
> 0=autopatchdn                           ; Autopatch down
>
> ;989=cop,4
> 980=status,3
> 99=cop,6
>
> ; Place command macros here
>
> [macro28203]
>
> 1 = *C90*C91*C94#
> 2 = *C92*C93#
>
> macro *51 will call *C90*C91*C94# and do the GPIO + Announce enabled +
> runs script
> however the script does not run? when called.?
>
> macro *52 will call the GPIO + Announce disabled and is called from the
> script correctly when run on the cmd line out side asterisk
>
> Thoughts  Barry
>
>
>
>  Timer is in seconds.
>>
>>
>> ...Let me know how it works for you.
>>
>> ...mike/kb8jnm
>>
>>
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150614/51a4c11e/attachment.html>