[App_rpt-users] homebrew USB sound fob no RX audio

[Kevin Custer]

Which version of the distro are you using?
SimpleUSB or USBRadio?
What is your server hardware?

Kevin


On 3/2/2015 9:37 AM, Skyler F wrote:
> There is RX audio, however! I plugged the device into my macbook 
> computer and activated the application Linein and heard the radio hiss 
> come back through my headphones and when I keyed up, I heard my voice 
> come back.
>
>
>
> On Mon, Mar 2, 2015 at 7:32 AM, Kevin Custer <kuggie at kuggie.com 
> <mailto:kuggie at kuggie.com>> wrote:
>
>     Skyler,
>
>     You may want to refer to the following articles to insure you
>     didn't cut the wrong trace eliminating RX audio getting to the
>     CM108 chip.  There is nothing wrong compatibility wise.
>
>     http://www.repeater-builder.com/projects/fob/startech-fob.html
>     http://www.repeater-builder.com/projects/fob/startech-syba-fob.html
>
>     The second article has a PDF you can refer to as well.
>
>     Kevin
>
>
>
>
>     On 3/1/2015 10:23 PM, Skyler F wrote:
>
>         I made the modification to the startech CM108 sound fob. This
>         is for a second node on the same machine. Everything should be
>         working, the node is transmitting with audio and PTT is
>         activating properly.
>
>         The receive should be working too, I plugged it in to my
>         macbook and was able to hear the white noise just fine and I
>         could hear my voice when I keyed up.
>
>         I also had Jeremy W0JRL help with everything on the software,
>         and we tried about everything from Flat audio to speaker audio
>         to COR to CTCSS but still no receive audio coming through the
>         network, it isn't detecting anything when I am transmitting
>         from my node radio to the node.
>
>         I was on the phone with him for almost two hours trying
>         anything we could think of, I did anything hardware, and he
>         modified anything software, but we still got no audio through
>         the network. We even turned off the squelch and there was a
>         dead carrier through the network.
>
>         Is there something wrong compatibility wise with this fob? I
>         did everything in the instructions and I got it from here
>         http://www.newegg.com/Product/Product.aspx?Item=N82E16829128002.
>
>         I used this instruction manual
>         http://www.repeater-builder.com/projects/fob/USB-Fob-Construction.pdf
>
>         If this is a compatibility issue, it is sure a weird one
>         because the Txaudio worked fine.
>
>         Is there a way to tell if any audio at all is coming in to
>         AllStar?
>
>         What can I try next to troubleshoot?
>
>
>         73
>         Skyler KDØWHB
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150302/78ab988e/attachment.html>