[App_rpt-users] Traffic monitor

[Keith Goobie]

Try ifconfig -a

[root at allstar ~]# ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:14:5E:A4:55:24
          inet addr:192.168.85.60  Bcast:192.168.85.255  Mask:255.255.255.0
          inet6 addr: fe80::214:5eff:fea4:5524/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:48427481 errors:0 dropped:0 overruns:0 frame:0
          TX packets:65822658 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:4101964571 (3.8 GiB)  TX bytes:2608472574 (2.4 GiB)
          Interrupt:169 Memory:deff0000-df000000




On 3/23/15 10:05 AM, "Robert Newberry" <N1XBM at amsat.org> wrote:

> I have a node that is running centos. I'd like to monitor how much data is
> being used by the ethernet port. Are there any tools already installed that I
> can leverage to do this?  I see there is something called nload but I would
> need to enable an epel repository to do this.
> 
> I'm trying to get an idea on average how much data I use in a month.
> 
> Thank you
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> the bottom of the page. Enter your email address and press the "Unsubscribe or
> edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to the
> list detailing the problem.

-- 
keith at goobie.org
Keith Goobie
Richmond Hill, ON, CANADA

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150323/180e09bd/attachment.html>