[App_rpt-users] DTMF Detect

[mike at midnighteng.com]

Bob,

The only thing I can think of that may be happening that makes sense is:

Check for dup command strings.
You should have no commands that start with a 5 as that has been reserved
for macros. Check your command list for type errors.

...mike/kb8jnm

>
> Remedied
>
> Thanks,
> Bob
> kk6ecm
>
> -----Original Message-----
> From: kk6ecm [mailto:kk6ecm at gmail.com]
> Sent: Sunday, March 29, 2015 11:56 AM
> To: 'app_rpt mailing list'
> Subject: DTMF Detect
>
>
> When I send a function command via iaxrpt to my node, it responds
> appropriately, but when I key in *5<macro#> from my radio (tried on HT and
> mobile), the node does not respond. It worked before I updated the
> computer
> hardware, same rpt.conf, and I believe the repeater hardware is the same
> configuration.
>
> 5=macro,1 ;in the [functions] list
>
> Thanks,
> Bob
> kk6ecm
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>