[App_rpt-users] Sending DTMF to remote device

[Steve Agee]

In addition to the line"
propagate_dtmf=yes
I think you also need a second line containing:
inxlat=*,#,0123456789ABCD               ; funchar,endchar,passchars

N5ZUA

On 5/9/2015 9:17 PM, Willem Schreuder wrote:
> I am trying to send DTMF codes to an SCOM controller via an AllStar 
> link. I have enabled propagate_dtmf=yes on both sides, and I think the 
> tones are reaching the remote node, but it is not been sent out on the 
> remote end. I have seen references suggesting you this in command 
> mode, but I want the remote node to ignore the tones, and output it to 
> the SCOM instead, so this doesn't seem appropriate.  Does anybody have 
> a HOWTO on this?
> 73 Willem AC0KQ
>
> ================================================================
> Dr. Willem A. Schreuder,  President,  Principia Mathematica
> Address:  445 Union Blvd, Suite 230,  Lakewood, CO  80228, USA
> Tel: (303) 716-3573   Fax: (303) 716-3575
> WWW: www.prinmath.com   Email: Willem.Schreuder at prinmath.com
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150510/9508f02b/attachment.html>