[App_rpt-users] CTCSS enable/disable

LaRoy McCann lmccann at dtisp.com
Thu May 14 17:15:25 UTC 2015


First, I am using RPI2 for the controller but I think this is more a 
generic question than a specific RPI2 question.

I can set "ctcssfrom=usb" in simpleusb.conf and then I have to use tone 
to make the controller receive commands or key the repeater.
After changing simpleusb.conf I issued the command 'asterisk -rx "rpt 
reload"'.  This would not make ctcss be required to key the repeater.
I had to 'astres.sh' before it would require tone to key the repeater.  
Not sure if the 'asterisk -rx "rpt reload"' should have worked or there 
is a bug somewhere?

What I am actually trying to be able to do is to enable/disable Rx CTCSS 
from dtmf commands.

I have configured a function for the cop=56(Rx CTCSS enable) and 
cop=57(Rx CTCSS disable) commands.
When I enter the dtmf for the cop=56 function the controller talks back 
"rx pl ena", so I know the function is working.  But I can still access 
the repeater without a CTCSS tone.

Can this be done?
I have searched all morning and can not find reference to it.

LaRoy McCann, K5TW



---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com




More information about the App_rpt-users mailing list