[App_rpt-users] USB Adapter has no EEPROM installed

Steven Donegan donegan at donegan.org
Sun Nov 1 19:55:29 UTC 2015


Is there anything that the URI will do with this EEPROM tuning info that Asterisk cannot do? 
 Steven Donegan
KK6IVC General Class FCC License
Silver State Car #86
www.sscc.us
      From: Jim Duuuude <telesistant at hotmail.com>
 To: Bryan D. Boyle <bdboyle at bdboyle.com>; Steve Zingman <szingman at msgstor.com> 
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org> 
 Sent: Sunday, November 1, 2015 11:52 AM
 Subject: Re: [App_rpt-users] USB Adapter has no EEPROM installed
   
#yiv5434072378 #yiv5434072378 --.yiv5434072378hmmessage P{margin:0px;padding:0px;}#yiv5434072378 body.yiv5434072378hmmessage{font-size:12pt;font-family:Calibri;}#yiv5434072378 The radio tuning parameters are stored in the EEPROM. Therefore, its probably best
to put the EEPROM in the connector with the cable physically connected to the radio,
so that you can change URI's, and the tuning parameters move with the radio, not the URI.

Yes, there are people that want the EEPROM in the URI, but I really am not sure why.

Jim



From: bdboyle at bdboyle.com
Date: Sun, 1 Nov 2015 14:48:57 -0500
To: szingman at msgstor.com
CC: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] USB Adapter has no EEPROM installed

you can order a uri with the memory installed.  

--BryanSent from my iPhone 6S...No electrons were harmed in the sending of this message.


On Nov 1, 2015, at 14:26, Steve Zingman <szingman at msgstor.com> wrote:


 Does the DMK URI ship with a EEPROM installed?
 I think it's external on the DB25 male connected to the URI. If there.
 
 On 11/01/2015 06:21 AM, Larry da Ponte wrote:
  
  Two questions for the group: 
  #1 I'm seeing this in my /var/log/asterisk - I'm using a DMK URI with EEPROM and a Motorola GM300 with one of Marshall's Motorola Maxtrac, GM300 and M120 16 Pin Radio to URI cables. 
  [Nov  1 11:30:05] NOTICE[6852] chan_usbradio.c: USB Adapter has no EEPROM installed or Checksum BAD on channel usb42372
 
  I understand that the benefit of the DMK URI with EEPROM is that the interface configuration can be stored in the URI as apposed to (where else?) - is this URI EEPROM feature taken advantage of with app_rpt and associated drivers? 
  #2 How do I choose which channel driver to use - simpleusb or USBRadio?  From what I've been able to learn through varius wikis and posts on the subject, I would want to use simpleusb because all of the hardware connections for COS and CTCSS are provided so there is no reason to use the DSP features of USBRadio thus simplifying what the driver has to do and perhaps lowering the CPU utilization.  I've also read some posts that describe audio degredation in the USBRadio driver but I can't tell you the cause.  I expect the right answer here is for me to try out both and experiment - which I will do but would appreciate any wisdome from the group on their experience with these drivers when using the DMK URI and hardware connections for COS/CTCSS.  My current configuration below is getting favorable audio reports. 
  I have no simpleusb.conf in my /etc/asterisk I have usbradio.conf and usbradio_tune_usb42372.conf 
  I have the following in my rpt.conf: rxchannel=Radio/usb42372 
  I have the following in my usbradio.conf: 
   [usb42372] 
  hdwtype=0  rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=71.9 rxctcssfreqs=71.9 txctcssfreqs=71.9 ;rxctcssoverride=0 carrierfrom=dsp ctcssfrom=dsp rxdemod=flat txprelim=yes txlimonly=no txtoctype=notone txmixa=composite txmixb=no invertptt=0 duplex=0 rxondelay=0 rxnoisefiltype=0 eeprom=1 
  
  
  
     
  
 _______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.  
 
 -- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

_______________________________________________App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151101/d6152325/attachment.html>


More information about the App_rpt-users mailing list