[App_rpt-users] Remote Base Timeout

[Steve Zingman]

Correction:
You want :
remote_inact_timeout=
remote_timeout=
remote_timeout_warning=
remote_timeout_freq=

In the remote base stanza.
I think the values are in seconds.

see <http://docs.allstarlink.org/drupal/node/117>

Steve

On 11/09/2015 07:56 PM, Jamey Wright wrote:
>
> In rpt.conf, Under the repeater node stanza:
>
> ;discpgm=yourdisconnectprogram
>
> ;lnkactenable=0
>
> ;lnkacttime=1800
>
> ;lnkactmacro=*52
>
> ;lnkacttimerwarn=30seconds
>
> ;remote_inact_timeout=1800
>
> ;remote_timeout=3600
>
> nounkeyct=1
>
> ;holdofftelem=0
>
> Under the remote base node stanza, none of this exists.
>
> Jamey
>
> WR4JW
>
> *From:*app_rpt-users-bounces at ohnosec.org 
> [mailto:app_rpt-users-bounces at ohnosec.org] *On Behalf Of *Steve Zingman
> *Sent:* Monday, November 09, 2015 5:14 AM
> *To:* app_rpt-users at ohnosec.org
> *Subject:* Re: [App_rpt-users] Remote Base Timeout
>
> Jamey,
> What are your settings for:
>
> remote_inact_timeout
> remote_timeout
>
> 73, Steve N4IRS
>
> On 11/08/2015 10:18 PM, Jamey Wright wrote:
>
>     I have a 2M remote base (TM-271) running on a node here.  How can
>     I change the activity timeout? There have been several instances
>     where I have been actively using the node and I get an activity
>     timeout message.  First it will announce timeout in 180 seconds. 
>     If I do anything like change power level, frequency, etc, it then
>     announces activity timeout in 3597 seconds, then about 15 seconds
>     later announces activity timeout in 3604 seconds and continues to
>     announce activity timeout every 30 seconds or so.  Disconnecting
>     and reconnecting is the only way to stop the countdown.
>
>     Thanks
>
>     Jamey
>
>     WR4JW
>
>
>
>
>     _______________________________________________
>
>     App_rpt-users mailing list
>
>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>
>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> -- 
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151109/69f9d363/attachment.html>