[App_rpt-users] Asterisk reboots-Clocking error

[Tim Sawyer]

Reading you post again; if what you want to do is just have an RTCM and a
URI you have to have two nodes. One for the URI and one for the RTCM.

rpt.conf:
[500]

rxchannel=SimpleUSB/500

duplex=2 # for repeater

...


# connect URI to RTCM at startup

startup_macro=*3501

...


[501]

rxchannel=Voter/501

duplex=2 #for repeater
...

voter.conf:

[501]

SITE1 = passwrd1,transmit

SITE2 = passwrd2

SITE3 = passwrd3

buflen = 250

plfilter = y



On Fri, Nov 13, 2015 at 3:45 PM, Tim Sawyer <tisawyer at gmail.com> wrote:

> Not sure what you want to do, but assuming you want to tie a bunch of
> controllers together, replacing 420 links for example,
> you don't need radbridge to bridge RTCMs. Just put all the RTCM under one
> node in voter.conf. The secret here is mixminus which stops a second repeat
> path back to the RTCM.
>
> rpt.conf:
>
> rxchannel=Voter/501
>
> duplex=0
>
> linktolink = yes
>
>
> voter.conf:
>
> [501]
>
> SITE1 = passwrd1,transmit,nodeemp,noplfilter
>
> SITE2 = passwrd2,transmit,nodeemp,noplfilter
>
> SITE3 = passwrd3,transmit,nodeemp,noplfilter
>
> buflen = 250
>
> mixminus = y
>
> plfilter = n
>
>
>
> On Fri, Nov 13, 2015 at 9:47 AM, Mark DuMoulin @ WB2ERS <wb2ers at metcom.com
> > wrote:
>
>> Hello All,
>>
>>
>>
>> I am running ACID with URI connected.
>>
>> I also have repeaters using RTCM units.
>>
>> When I attempt to use radbridge.conf to combine RTCM and URI as shown
>> below:
>>
>>
>>
>> [general]
>>
>> instance1 = Voter/rtcm,Radio/usb
>>
>>
>>
>> This is what happens:
>>
>>
>>
>> [Nov 13 12:37:01] NOTICE[12655]: chan_usbradio.c:3273 usbradio_request:
>> Already have a call (chan 0x91b4d18) on the usb channel
>>
>> [Nov 13 12:37:03] NOTICE[12613]: app_rpt.c:22002 rpt_master: RPT thread
>> restarted on 1448
>>
>> [Nov 13 12:37:03] WARNING[12613]: app_rpt.c:22014 rpt_master: rpt_thread
>> restarted on node 1448
>>
>>     -- Re-Loading config for repeater 1448
>>
>> [Nov 13 12:37:03] NOTICE[12656]: chan_usbradio.c:3273 usbradio_request:
>> Already have a call (chan 0x91b4d18) on the usb channel
>>
>> [Nov 13 12:37:05] ERROR[12613]: app_rpt.c:21997 rpt_master: *Continual
>> RPT thread restarts, killing Asterisk*
>>
>>
>>
>> Does anyone have any thoughts as to why this is occurring or a different
>> approach on combining the URI and RTCM end points?
>>
>> Mark DuMoulin
>>
>> WB2ERS
>>
>> Wb2ers at metcom.com
>>
>> C 800-410-3130
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> --
> --
> Tim
>



-- 
--
Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151113/ca2a2fd0/attachment.html>