[App_rpt-users] DIAL with Broadcastify etc via ezstream
Steve Zingman
szingman at msgstor.com
Thu Oct 8 17:33:14 UTC 2015
Good to hear.
It might be worth documenting what needs to be installed and any tweaks
that need to be done.
73, Steve N4IRS
On 10/08/2015 01:30 PM, Mark Johnston wrote:
> it's streaming, I even did a reboot and it's live now - not sure what
> the problem was, maybe something on their end...
>
> http://www.broadcastify.com/listen/feed/21348/web
>
> "Got Root?"
>
> How many software engineers does it take to change a light bulb?
> *None. It's a hardware problem.*
>
>
> Unix is user friendly. It's just very particular about who it's
> friends are.
> WINDOWS: Will Install Needless Data On Whole System
> MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools
> Teenagers.
>
>
> A ntennas
> P oorly
> P laced
> L acks
> E ngineering
>
> The best way to accelerate a computer running Windows is at 9.81 m/s².
>
> /*_/"I get paid to support Windows, I use Linux to get work done."/_*/
>
>
> On Thu, Oct 8, 2015 at 10:20 AM, Steve Zingman <szingman at msgstor.com
> <mailto:szingman at msgstor.com>> wrote:
>
> Working as in streaming from the node or sending a audio file?
>
>
> On 10/08/2015 01:19 PM, Mark Johnston wrote:
>> it gave me a login error
>>
>> ezstream: Connection to
>> http://audio3.broadcastify.com:80/wcms5pn74trz failed: Login failed
>>
>> ezstream: Exiting ...
>>
>>
>> suddenly started working - not sure how/why though -
>>
>>
>>
>> "Got Root?"
>>
>> How many software engineers does it take to change a light bulb?
>> *None. It's a hardware problem.*
>>
>>
>> Unix is user friendly. It's just very particular about who it's
>> friends are.
>> WINDOWS: Will Install Needless Data On Whole System
>> MICROSOFT: Most Intelligent Customers Realize Our Software Only
>> Fools Teenagers.
>>
>>
>> A ntennas
>> P oorly
>> P laced
>> L acks
>> E ngineering
>>
>> The best way to accelerate a computer running Windows is at 9.81
>> m/s².
>>
>> /*_/"I get paid to support Windows, I use Linux to get work
>> done."/_*/
>>
>>
>> On Thu, Oct 8, 2015 at 10:06 AM, Steve Zingman
>> <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>
>> can you send a audio file to broadcastify with the command
>> line below?
>>
>>
>> On 10/08/2015 01:00 PM, Mark Johnston wrote:
>>>
>>> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m
>>> m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -qvc
>>> /etc/ezstream1001.xml
>>>
>>>
>>> This just started appearing
>>>
>>>
>>> [Oct 8 09:35:48] ERROR[695] app_rpt.c: pipe() failed!
>>>
>>> [Oct 8 09:35:50] ERROR[695] app_rpt.c: pipe() failed!
>>>
>>> [Oct 8 09:35:52] ERROR[695] app_rpt.c: pipe() failed!
>>>
>>> [Oct 8 09:35:54] ERROR[695] app_rpt.c: pipe() failed!
>>>
>>> [Oct 8 09:35:56] ERROR[695] app_rpt.c: pipe() failed!
>>>
>>> [Oct 8 09:35:58] ERROR[695] app_rpt.c: pipe() failed!
>>>
>>>
>>> "Got Root?"
>>>
>>> How many software engineers does it take to change a light bulb?
>>> *None. It's a hardware problem.*
>>>
>>>
>>> Unix is user friendly. It's just very particular about who
>>> it's friends are.
>>> WINDOWS: Will Install Needless Data On Whole System
>>> MICROSOFT: Most Intelligent Customers Realize Our Software
>>> Only Fools Teenagers.
>>>
>>>
>>> A ntennas
>>> P oorly
>>> P laced
>>> L acks
>>> E ngineering
>>>
>>> The best way to accelerate a computer running Windows is at
>>> 9.81 m/s².
>>>
>>> /*_/"I get paid to support Windows, I use Linux to get work
>>> done."/_*/
>>>
>>>
>>> On Thu, Oct 8, 2015 at 9:55 AM, Steve Zingman
>>> <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>>
>>> Mark,
>>> Your log is showing problems with sip and possibly a
>>> sound fob.
>>> I don't think you need app_ices
>>>
>>> Please post you outstreamcmd in rpt.conf
>>>
>>> you may want to disable the sip changes while
>>> troubleshooting streaming.
>>>
>>> 73, Steve N4IRS
>>>
>>>
>>>
>>> On 10/08/2015 12:13 PM, Mark Johnston wrote:
>>>> Anyone try setting this up yet?
>>>> Used to use this with ACID just fine
>>>> Installed ezstream, and Lame -
>>>>
>>>>
>>>> shows it's running
>>>>
>>>> 1124 ? S 0:00 /bin/sh -c /usr/bin/lame
>>>> --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - |
>>>> /usr/bin/ezstream -qvc /etc/ezstream1001.xml
>>>>
>>>>
>>>> I enabled this module, thinking thats what it needed
>>>>
>>>> load => app_ices.so ; Encode and Stream via icecast and
>>>> ices
>>>>
>>>>
>>>>
>>>> ;modules.conf
>>>>
>>>> autoload=no
>>>>
>>>>
>>>> ; Applications
>>>>
>>>>
>>>> noload => app_adsiprog.so ;Asterisk ADSI Programming
>>>> Application
>>>>
>>>> noload => app_alarmreceiver.so ;Alarm Receiver for
>>>> Asterisk
>>>>
>>>> noload => app_amd.so ;Answering Machine Detection
>>>> Application
>>>>
>>>> load => app_authenticate.so ; Authentication Application
>>>>
>>>> noload => app_cdr.so ;Tell Asterisk to not maintain a
>>>> CDR for
>>>>
>>>> noload => app_chanisavail.so ;Check channel availability
>>>>
>>>> noload => app_channelredirect.so ;Channel Redirect
>>>>
>>>> load => app_chanspy.so ;Listen to the audio of an
>>>> active channel
>>>>
>>>> noload => app_controlplayback.so ;Control Playback
>>>> Application
>>>>
>>>> noload => app_dahdibarge.so ;Barge in on channel
>>>> application
>>>>
>>>> noload => app_dahdiras.so ;DAHDI RAS Application
>>>>
>>>> noload => app_dahdiscan.so ;Scan Zap channels application
>>>>
>>>> noload => app_db.so ;Database Access Functions
>>>>
>>>> load => app_dial.so ;Dialing Application
>>>>
>>>> noload => app_dictate.so ;Virtual Dictation Machine
>>>>
>>>> noload => app_directed_pickup.so ;Directed Call Pickup
>>>> Application
>>>>
>>>> noload => app_directory.so ;Extension Directory
>>>>
>>>> noload => app_disa.so ;DISA (Direct Inward System
>>>> Access) Appli
>>>>
>>>> noload => app_dumpchan.so ;Dump Info About The Calling
>>>> Channel
>>>>
>>>> noload => app_echo.so ;Simple Echo Application
>>>>
>>>> load => app_exec.so ;Executes dialplan applications
>>>>
>>>> noload => app_externalivr.so ;External IVR Interface
>>>> Application
>>>>
>>>> noload => app_festival.so ;Simple Festival Interface
>>>>
>>>> noload => app_flash.so ;Flash channel application
>>>>
>>>> noload => app_followme.so ;Find-Me/Follow-Me Application
>>>>
>>>> noload => app_forkcdr.so ;Fork The CDR into 2 separate
>>>> entities
>>>>
>>>> noload => app_getcpeid.so ;Get ADSI CPE ID
>>>>
>>>> noload => app_gps.so ;GPS interface module
>>>>
>>>> noload => app_hasnewvoicemail.so ;Indicator for whether
>>>> a voice mailbox ha
>>>>
>>>> load => app_ices.so ;Encode and Stream via icecast and
>>>> ices
>>>>
>>>> noload => app_image.so ;Image Transmission Application
>>>>
>>>> noload => app_lookupblacklist.so ;Look up Caller*ID
>>>> name/number from black
>>>>
>>>> noload => app_lookupcidname.so ;Look up CallerID Name
>>>> from local databas
>>>>
>>>> load => app_macro.so ;Extension Macros
>>>>
>>>> noload => app_meetme.so ;MeetMe conference bridge
>>>>
>>>> noload => app_milliwatt.so ;Digital Milliwatt (mu-law)
>>>> Test Applicat
>>>>
>>>> noload => app_mixmonitor.so ;Mixed Audio Monitoring
>>>> Application
>>>>
>>>> noload => app_morsecode.so ;Morse code
>>>>
>>>> noload => app_mp3.so ;Silly MP3 Application
>>>>
>>>> noload => app_nbscat.so ;Silly NBS Stream Application
>>>>
>>>> noload => app_page.so ;Page Multiple Phones
>>>>
>>>> noload => app_parkandannounce.so ;Call Parking and
>>>> Announce Application
>>>>
>>>> load => app_playback.so ;Sound File Playback Application
>>>>
>>>> noload => app_privacy.so ;Require phone number to be
>>>> entered, if n
>>>>
>>>> noload => app_queue.so ;True Call Queueing
>>>>
>>>> noload => app_radbridge.so ;Radio Bridging interface
>>>> module
>>>>
>>>> noload => app_random.so ;Random goto
>>>>
>>>> noload => app_readfile.so ;Stores output of file into a
>>>> variable
>>>>
>>>> noload => app_read.so ;Read Variable Application
>>>>
>>>> noload => app_realtime.so ;Realtime Data Lookup/Rewrite
>>>>
>>>> noload => app_record.so ;Trivial Record Application
>>>>
>>>> load => app_rpt.so ;Radio Repeater/Remote Base Application
>>>>
>>>> noload => app_sayunixtime.so ;Say time
>>>>
>>>> load => app_senddtmf.so ;Send DTMF digits Application
>>>>
>>>> noload => app_sendtext.so ;Send Text Applications
>>>>
>>>> noload => app_setcallerid.so ;Set CallerID Application
>>>>
>>>> noload => app_setcdruserfield.so ;CDR user field apps
>>>>
>>>> noload => app_settransfercapability.so ;Set ISDN
>>>> Transfer Capability
>>>>
>>>> noload => app_sms.so ;SMS/PSTN handler
>>>>
>>>> noload => app_softhangup.so ;Hangs up the requested
>>>> channel
>>>>
>>>> noload => app_speech_utils.so ;Dialplan Speech
>>>> Applications
>>>>
>>>> noload => app_stack.so ;Stack Routines
>>>>
>>>> load => app_system.so ;Generic System() application
>>>>
>>>> noload => app_talkdetect.so ;Playback with Talk Detection
>>>>
>>>> noload => app_test.so ;Interface Test Application
>>>>
>>>> load => app_transfer.so ;Transfer
>>>>
>>>> noload => app_url.so ;Send URL Applications
>>>>
>>>> noload => app_userevent.so ;Custom User Event Application
>>>>
>>>> noload => app_verbose.so ;Send verbose output
>>>>
>>>> noload => app_voicemail.so ;Comedian Mail (Voicemail
>>>> System)
>>>>
>>>> noload => app_waitforring.so ;Waits until first ring
>>>> after time
>>>>
>>>> noload => app_waitforsilence.so ;Wait For Silence
>>>>
>>>> noload => app_while.so ;While Loops and Conditional
>>>> Execution
>>>>
>>>> noload => app_zapateller.so ;Block Telemarketers with
>>>> Special Informa
>>>>
>>>>
>>>> ; CDR
>>>>
>>>>
>>>> noload => cdr_csv.so ;Comma Separated Values CDR Backend
>>>>
>>>> noload => cdr_custom.so ;Customizable Comma Separated
>>>> Values CDR
>>>>
>>>> noload => cdr_manager.so ;Asterisk Manager Interface
>>>> CDR Backend
>>>>
>>>>
>>>> ; Channels
>>>>
>>>>
>>>> noload => chan_agent.so ;Agent Proxy Channel
>>>>
>>>> noload => chan_alsa.so ;ALSA Console Channel Driver
>>>>
>>>> noload => chan_beagle.so ;Beagleboard Radio Interface
>>>> Channel Driver
>>>>
>>>> load => chan_dahdi.so ;DAHDI Telephony
>>>>
>>>> noload => chan_echolink.so ;echolink channel driver
>>>>
>>>> noload => chan_features.so ;Feature Proxy Channel
>>>>
>>>> noload => chan_gtalk.so ;Gtalk Channel Driver
>>>>
>>>> load => chan_iax2.so ;Inter Asterisk eXchange (Ver 2)
>>>>
>>>> load => chan_local.so ;Local Proxy Channel (Note: used
>>>> internal
>>>>
>>>> noload => chan_oss.so ;
>>>>
>>>> noload => chan_phone.so ;
>>>>
>>>> load => chan_simpleusb.so ;Simple USB Radio Interface
>>>> Channel Drive
>>>>
>>>> load => chan_sip.so ;Session Initiation Protocol (SIP)
>>>>
>>>> noload => chan_tlb.so ;TheLinkBox channel driver
>>>>
>>>> load => chan_usbradio.so ;USB Console Channel Driver
>>>>
>>>> noload => chan_usrp.so ;USRP Channel Module
>>>>
>>>> noload => chan_voter.so ;radio Voter channel driver
>>>>
>>>>
>>>> ; Codecs
>>>>
>>>>
>>>> ; CODEC AUDIO QUALITY BANDWIDTH (including IP and
>>>> Ethernet headers)
>>>>
>>>> ; ULAW best 87 kilobits per second (kbps)
>>>>
>>>> ; ADPCM good 55 kbps
>>>>
>>>> ; GSM mediocre 36 kbps
>>>>
>>>> ; g726aal2
>>>>
>>>> ; ilbc
>>>>
>>>>
>>>> load => codec_adpcm.so ;Adaptive Differential PCM
>>>> Coder/Decoder
>>>>
>>>> load => codec_alaw.so ;A-law Coder/Decoder
>>>>
>>>> load => codec_a_mu.so ;A-law and Mulaw direct
>>>> Coder/Decoder
>>>>
>>>> noload => codec_dahdi.so ;Generic DAHDI Transcoder
>>>> Codec Translato
>>>>
>>>> load => codec_g726.so ;ITU G.726-32kbps G726 Transcoder
>>>>
>>>> load => codec_gsm.so ;GSM Coder/Decoder
>>>>
>>>> load => codec_ulaw.so ;mu-Law Coder/Decoder
>>>>
>>>> noload => codec_ilbc.so
>>>> ;http://en.wikipedia.org/wiki/Internet_Low_Bitrate_Codec
>>>>
>>>>
>>>> ; Formats
>>>>
>>>>
>>>> load => format_g723.so ;G.723.1 Simple Timestamp File
>>>> Format
>>>>
>>>> load => format_g726.so ;Raw G.726 (16/24/32/40kbps) data
>>>>
>>>> load => format_g729.so ;Raw G729 data
>>>>
>>>> load => format_gsm.so ;Raw GSM data
>>>>
>>>> load => format_h263.so ;Raw H.263 data
>>>>
>>>> load => format_h264.so ;Raw H.264 data
>>>>
>>>> load => format_ilbc.so ;Raw iLBC data
>>>>
>>>> noload => format_jpeg.so ;JPEG (Joint Picture Experts
>>>> Group) Image
>>>>
>>>> load => format_pcm.so ;Raw/Sun uLaw/ALaw 8KHz
>>>> (PCM,PCMA,AU), G.
>>>>
>>>> load => format_sln.so ;Raw Signed Linear Audio support
>>>> (SLN)
>>>>
>>>> load => format_vox.so ;Dialogic VOX (ADPCM) File Format
>>>>
>>>> load => format_wav_gsm.so ;Microsoft WAV format
>>>> (Proprietary GSM)
>>>>
>>>> load => format_wav.so ;Microsoft WAV format (8000Hz
>>>> Signed Line
>>>>
>>>>
>>>> ; Functions
>>>>
>>>>
>>>> load => func_base64.so ;base64 encode/decode dialplan
>>>> functions
>>>>
>>>> load => func_callerid.so ;Caller ID related dialplan
>>>> function
>>>>
>>>> load => func_cdr.so ;CDR dialplan function
>>>>
>>>> load => func_channel.so ;Channel information dialplan
>>>> function
>>>>
>>>> load => func_curl.so ;Load external URL
>>>>
>>>> load => func_cut.so ;Cut out information from a string
>>>>
>>>> load => func_db.so ;Database (astdb) related dialplan
>>>> functi
>>>>
>>>> load => func_enum.so ;ENUM related dialplan functions
>>>>
>>>> load => func_env.so ;Environment/filesystem dialplan
>>>> function
>>>>
>>>> load => func_global.so ;Global variable dialplan functions
>>>>
>>>> load => func_groupcount.so ;Channel group dialplan
>>>> functions
>>>>
>>>> load => func_language.so ;Channel language dialplan
>>>> function
>>>>
>>>> load => func_logic.so ;Logical dialplan functions
>>>>
>>>> load => func_math.so ;Mathematical dialplan function
>>>>
>>>> load => func_md5.so ;MD5 digest dialplan functions
>>>>
>>>> load => func_moh.so ;Music-on-hold dialplan function
>>>>
>>>> load => func_rand.so ;Random number dialplan function
>>>>
>>>> load => func_realtime.so ;Read/Write values from a
>>>> RealTime reposi
>>>>
>>>> noload => func_sha1.so ;SHA-1 computation dialplan
>>>> function
>>>>
>>>> noload => func_strings.so ;String handling dialplan
>>>> functions
>>>>
>>>> noload => func_timeout.so ;Channel timeout dialplan
>>>> functions
>>>>
>>>> noload => func_uri.so ;URI encode/decode dialplan
>>>> functions
>>>>
>>>>
>>>> ; PBX
>>>>
>>>>
>>>> noload => pbx_ael.so ;Asterisk Extension Language Compiler
>>>>
>>>> load => pbx_config.so ;Text Extension Configuration
>>>>
>>>> noload => pbx_dundi.so ;Distributed Universal Number
>>>> Discovery (
>>>>
>>>> noload => pbx_loopback.so ;Loopback Switch
>>>>
>>>> noload => pbx_realtime.so ;Realtime Switch
>>>>
>>>> noload => pbx_spool.so ;Outgoing Spool Support
>>>>
>>>>
>>>> ; Resources
>>>>
>>>>
>>>> load => res_adsi.so ;ADSI Resource
>>>>
>>>> noload => res_agi.so ;Asterisk Gateway Interface (AGI)
>>>>
>>>> noload => res_clioriginate.so ;Call origination from
>>>> the CLI
>>>>
>>>> noload => res_convert.so ;File format conversion CLI
>>>> command
>>>>
>>>> noload => res_crypto.so ;Cryptographic Digital Signatures
>>>>
>>>> load => res_features.so ;Call Features Resource
>>>>
>>>> load => res_indications.so ;Indications Resource
>>>>
>>>> noload => res_jabber.so ;AJI - Asterisk Jabber Interface
>>>>
>>>> noload => res_monitor.so ;Call Monitoring Resource
>>>>
>>>> noload => res_musiconhold.so ;Music On Hold Resource
>>>>
>>>> noload => res_smdi.so ;Simplified Message Desk
>>>> Interface (SMDI)
>>>>
>>>> noload => res_snmp.so ;SNMP [Sub]Agent for Asterisk
>>>>
>>>> noload => res_speech.so ;Generic Speech Recognition API
>>>>
>>>>
>>>> [global]
>>>>
>>>>
>>>>
>>>>
>>>> /var/log/asterisk/messages;
>>>>
>>>> [Oct 8 08:44:24] NOTICE[1278] cdr.c: CDR simple
>>>> logging enabled.
>>>>
>>>> [Oct 8 08:44:24] NOTICE[1278] indications.c: Removed
>>>> default indication country 'us'
>>>>
>>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring
>>>> switchtype
>>>>
>>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring
>>>> signalling
>>>>
>>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring
>>>> rxwink
>>>>
>>>> [Oct 8 08:44:24] NOTICE[1278] chan_iax2.c: Ignoring
>>>> bindport on reload
>>>>
>>>> [Oct 8 08:44:24] NOTICE[1278] chan_iax2.c: Ignoring
>>>> bindaddr on reload
>>>>
>>>> [Oct 8 08:44:25] WARNING[1278] acl.c: is not a valid IP
>>>>
>>>> [Oct 8 08:44:25] WARNING[714] chan_sip.c:
>>>> insecure=very at line 31 is deprecated; use
>>>> insecure=port,invite instead
>>>>
>>>> [Oct 8 08:47:46] NOTICE[683] cdr.c: CDR simple logging
>>>> enabled.
>>>>
>>>> [Oct 8 08:47:46] NOTICE[683] loader.c: 56 modules will
>>>> be loaded.
>>>>
>>>> [Oct 8 08:47:46] WARNING[683] acl.c: is not a valid IP
>>>>
>>>> [Oct 8 08:47:46] WARNING[683] acl.c: Unable to lookup
>>>> 'callcentric.com <http://callcentric.com>'
>>>>
>>>> [Oct 8 08:47:46] WARNING[714] chan_sip.c: No such
>>>> host: callcentric.com <http://callcentric.com>
>>>>
>>>> [Oct 8 08:47:46] WARNING[714] chan_sip.c: Probably a
>>>> DNS error for registration to
>>>> 17772150287101 at callcentric.com
>>>> <mailto:17772150287101 at callcentric.com>, trying
>>>> REGISTER again (after 20 seconds)
>>>>
>>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal
>>>> Repeater Init 29626
>>>>
>>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal
>>>> Repeater Init 29627
>>>>
>>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal
>>>> Repeater Init 1001
>>>>
>>>> [Oct 8 08:47:47] WARNING[722] chan_usbradio.c: Loaded
>>>> parameters from usbradio_tune_usb1001.conf for device
>>>> usb1001 .
>>>>
>>>> [Oct 8 08:47:47] WARNING[720] chan_usbradio.c:
>>>> Possibly stuck USB read channel. [usb1001]
>>>>
>>>> [Oct 8 08:47:47] WARNING[720] chan_usbradio.c: Nope,
>>>> USB read channel [usb1001] wasn't stuck after all.
>>>>
>>>> [Oct 8 08:47:47] NOTICE[719] chan_simpleusb.c:
>>>> Assigned USB device 5-2:1.0 to simpleusb channel usb29626
>>>>
>>>> [Oct 8 08:47:47] WARNING[719] chan_simpleusb.c: Loaded
>>>> parameters from simpleusb_tune_usb29626.conf for device
>>>> usb29626 .
>>>>
>>>> [Oct 8 08:47:47] NOTICE[721] chan_usbradio.c: Assigned
>>>> USB device 5-2:1.0 to usbradio channel usb29627
>>>>
>>>> [Oct 8 08:47:47] WARNING[721] chan_usbradio.c: Loaded
>>>> parameters from usbradio_tune_usb29627.conf for device
>>>> usb29627 .
>>>>
>>>> [Oct 8 08:47:47] WARNING[721] chan_usbradio.c: Unable
>>>> to re-open DSP device 2 (usb29627): Device or resource busy
>>>>
>>>> [Oct 8 08:48:06] NOTICE[714] chan_sip.c: --
>>>> Registration for '17772150287101 at callcentric.com
>>>> <mailto:17772150287101 at callcentric.com>' timed out,
>>>> trying again (Attempt #1)
>>>>
>>>> [Oct 8 08:59:15] NOTICE[673] cdr.c: CDR simple logging
>>>> enabled.
>>>>
>>>> [Oct 8 08:59:15] NOTICE[673] loader.c: 57 modules will
>>>> be loaded.
>>>>
>>>> [Oct 8 08:59:15] WARNING[673] acl.c: is not a valid IP
>>>>
>>>> [Oct 8 08:59:15] WARNING[673] acl.c: Unable to lookup
>>>> 'callcentric.com <http://callcentric.com>'
>>>>
>>>> [Oct 8 08:59:15] WARNING[711] chan_sip.c: No such
>>>> host: callcentric.com <http://callcentric.com>
>>>>
>>>> [Oct 8 08:59:15] WARNING[711] chan_sip.c: Probably a
>>>> DNS error for registration to
>>>> 17772150287101 at callcentric.com
>>>> <mailto:17772150287101 at callcentric.com>, trying
>>>> REGISTER again (after 20 seconds)
>>>>
>>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal
>>>> Repeater Init 29626
>>>>
>>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal
>>>> Repeater Init 29627
>>>>
>>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal
>>>> Repeater Init 1001
>>>>
>>>> [Oct 8 08:59:15] WARNING[718] chan_usbradio.c: Loaded
>>>> parameters from usbradio_tune_usb29627.conf for device
>>>> usb29627 .
>>>>
>>>> [Oct 8 08:59:15] WARNING[715] chan_usbradio.c:
>>>> Possibly stuck USB read channel. [usb29627]
>>>>
>>>> [Oct 8 08:59:16] WARNING[715] chan_usbradio.c: Nope,
>>>> USB read channel [usb29627] wasn't stuck after all.
>>>>
>>>> [Oct 8 08:59:16] NOTICE[719] chan_usbradio.c: Assigned
>>>> USB device 5-2:1.0 to usbradio channel usb1001
>>>>
>>>> [Oct 8 08:59:16] NOTICE[716] chan_simpleusb.c:
>>>> Assigned USB device 5-2:1.0 to simpleusb channel usb29626
>>>>
>>>> [Oct 8 08:59:16] WARNING[716] chan_simpleusb.c: Loaded
>>>> parameters from simpleusb_tune_usb29626.conf for device
>>>> usb29626 .
>>>>
>>>> [Oct 8 08:59:16] WARNING[719] chan_usbradio.c: Loaded
>>>> parameters from usbradio_tune_usb1001.conf for device
>>>> usb1001 .
>>>>
>>>> [Oct 8 08:59:16] WARNING[719] chan_usbradio.c: Unable
>>>> to re-open DSP device 2 (usb1001): Device or resource busy
>>>>
>>>> [Oct 8 08:59:35] NOTICE[711] chan_sip.c: --
>>>> Registration for '17772150287101 at callcentric.com
>>>> <mailto:17772150287101 at callcentric.com>' timed out,
>>>> trying again (Attempt #1)
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> - Is there something else to enable or a better app to
>>>> use, for feeding to broadcastify?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> <mailto:App_rpt-users at ohnosec.org>
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>
>>> --
>>> "Anything is possible if you don't know what you are talking about."
>>> 1st Law of Logic
>>>
>>>
>>
>> --
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>>
>>
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>
>
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151008/b03fed04/attachment.html>
More information about the App_rpt-users
mailing list