[App_rpt-users] Procedure for loading DIAL on a R-Pi2 or a PC

[Bob Prybyzerski]

There is a faq available 
http://docs.allstarlink.org/drupal/node/170

Bob W2YMM

Sent from my iPhone
Bob Prybyzerski
631-960-1051

> On Oct 27, 2015, at 10:20 AM, N7MTC . <n7mtc at outlook.com> wrote:
> 
> Is there a procedure for loading the "new" DIAL version of asterisk for Raspberry pi2?  
>  
> I am looking to connect either a Pi2 or an intel NUC to a Yaesu Dr-1x using the Arcom RC-210 and  the Arcom ADR.  I noticed DIAL has replaced ACID as the latest flavor of asterisk for both PC and PI2.  I have not found any install write-ups or YouTubes showing a DIAL install.
>  
> Regardless of which platform I will need to use an USB to Serial adapter to connect the ALLSTAR node to the repeater controller.  It will be of the FTDI chipset either a trendnet Tu-s9 or a GearMo USB RS-232.
>  
>  
> /73
> Mac, N7MTC
>  
>  
> Benjamin Franklin - "Those who surrender freedom for security will not have, nor do they deserve, either one."
>  
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151027/a98a1853/attachment.html>