[App_rpt-users] DIAL Question

[Steve Zingman]

The channel drivers are not disabled. They are not enabled. Simple edit to
enable the channel drivers and features you want to use.

Sent via smoke signal (Verizon)
On Oct 28, 2015 5:48 PM, Neil k8it <k8it at cac.net> wrote:
I have been waiting a bit before I start playing with DIAL on a RPI2.
I still have two questions
1. Does the RPI2 DIAL  version solve the tx echo buffer issue that the
current version of Asterisk RPI2 code has. The fix to this issue seems to
be taking a long time.
2. Some users have reorted that a lot of modules have been disabled, such
as the Echolink channel driver and others.
3. With the new Mini-DV4  dongle $125  and the amount of capability, has
anybody wrote a channel driver to tie the Yaesu Fusion Wires-X network into
DIAL. It appears that most of the documentation is out there, we just need
someone to write the channel driver


Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L
WIRES-X K8IT 11479 Room 21479

*From:* Steve N4IRS <szingman at msgstor.com>
*Sent:* Tuesday, October 27, 2015 10:35 AM
*To:* N7MTC . <n7mtc at outlook.com> ; app_rpt-users at ohnosec.org
*Subject:* Re: [App_rpt-users] Procedure for loading DIAL on a R-Pi2 or a PC

Mac,
The RPi2 install is pretty much download the image, burn it to SD card,.
Once the Pi boots, you can login on the HDMI / USB console, or SSH into the
board on port 222.
The board is setup for DHCP so check your DHCP (router) server for address.
If you want, you can login via the built in serial port at 115,200
System will walk you through setup.

FAQ for DIAL is at:
<http://docs.allstarlink.org/drupal/node/170>
<http://docs.allstarlink.org/drupal/node/170>>

73, Steve N4IRS


On 10/27/2015 10:20 AM, N7MTC . wrote:

Is there a procedure for loading the "new" DIAL version of asterisk for
Raspberry pi2?



I am looking to connect either a Pi2 or an intel NUC to a Yaesu Dr-1x using
the Arcom RC-210 and  the Arcom ADR.  I noticed DIAL has replaced ACID as
the latest flavor of asterisk for both PC and PI2.  I have not found any
install write-ups or YouTubes showing a DIAL install.



Regardless of which platform I will need to use an USB to Serial adapter to
connect the ALLSTAR node to the repeater controller.  It will be of the
FTDI chipset either a trendnet Tu-s9 or a GearMo USB RS-232.





/73

Mac, N7MTC





Benjamin Franklin - "Those who surrender freedom for security will not
have, nor do they deserve, either one."



_______________________________________________
App_rpt-users mailing
listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
down to the bottom of the page. Enter your email address and press the
"Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message
to the list detailing the problem.


------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
to the bottom of the page. Enter your email address and press the
"Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.

------------------------------

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6173 / Virus Database: 4455/10900 - Release Date: 10/27/15
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151028/1786abc6/attachment.html>