[App_rpt-users] URI startup

[Steve Zingman]

Also noticed "I have the receiver audio connected to pin 22 Left_Out."
Receive audio goes to mic in pin 9.

On 10/29/2015 9:55 AM, Mark DuMoulin @ WB2ERS wrote:
>
> Hello all. New user here trying to get up to speed.
>
> I connected a DMK URI to our Asterisk running ACID.
>
> We configured it as follows:
>
> ----------usbradio.conf-------------
>
> [general]
>
> [usb]
>
> hdwtype=0
>
> rxboost=1
>
> rxctcssrelax=1
>
> rxctcssfreqs=100.0
>
> carrierfrom=usb
>
> ctcssfrom=usb
>
> rxdemod=flat
>
> txprelim=yes
>
> txlimonly=yes
>
> txtoctype=notone
>
> txmixa=voice
>
> txmixb=no
>
> invertptt=0
>
> duplex=1
>
> ------------------rpt.conf--------------
>
> [1444]
>
> rxchannel=Radio/usb
>
> erxgain=-3
>
> etxgain=3
>
> controlstates=controlstates
>
> functions=functions
>
> phone_functions=functions
>
> link_functions=functions
>
> telemetry=telemetry
>
> wait_times=wait-times
>
> context=radio-usb
>
> callerid="WB2ERS" <0000000000>
>
> idrecording = |WB2ERS
>
> accountcode=RADIO
>
> hangtime=1000
>
> althangtime=4000
>
> totime=170000
>
> idtime=540000
>
> politeid=30000
>
> idtalkover=|iid
>
> nounkeyct=1
>
> duplex=1
>
> ----------extensions.conf----------
>
> [radio-usb]
>
> exten => 1444,1,Ringing
>
> exten => 1444,n,Wait(3)
>
> exten => 1444,n,Answer
>
> exten => 1444,n,Rpt(1444|X)
>
> exten => 1444,n,Hangup
>
> -------------iax.conf--------------
>
> [IAXURI]
>
> type=user
>
> context=radio-usb
>
> auth=md5
>
> secret=mysecret
>
> host=dynamic
>
> disallow=all
>
> allow=gsm
>
> notransfer=yes
>
> callerid=IAXURI
>
> We have one way audio and signaling from the Ethernet side to the 
> radio side however from the radio to the Asterisk, nothing.
>
> I verified that CTCSS detect (pin 7) goes from 5v to 0v upon receive 
> signal .
>
> I have the receiver audio connected to pin 22 Left_Out.
>
> Any ideas?
>
> Mark DuMoulin
>
> WB2ERS
>
> Wb2ers at metcom.com
>
> C 800-410-3130
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151029/06025c1c/attachment.html>