[App_rpt-users] Pi2 GPIO???

[pete M]

TTL in 5 volts.. RPI2 gpio is 3.3volts If I am not crazy..


Date: Fri, 30 Oct 2015 11:27:48 -0500
From: yokshs at gmail.com
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Pi2 GPIO???

Ok, I wasn't sure... If you need a beta tester, I'll be glad to help! :-) 
I'm planning on making a cable from GPIO to my homebrew parallel port interface box... I haven't researched the Pi2 GPIO, but assumed it would be TTL logic? That'd make it super easy to go from parallel to GPIO...
73
--- Original Message ---
Tim was referring to GPIO on the CM1xx.
That being said, Mike and I are starting to talk about GPIO on the RPi2

73, Steve N4IRS

On 10/30/2015 12:08 PM, K Yoksh wrote:
>
> I'm looking forward to using my Pi nodes with GPIO for PTT/COS, but I
> thought GPIO wasn't supported until the next release?
>
> 73
>
>Kyle
>K0KN> Olathe, KS



_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151030/78953641/attachment.html>