[App_rpt-users] Stuck Tx on System

[Jesse Lloyd]

Solid state meaning no spinner hard drive, that's all. 

Jesse

> On Sep 3, 2015, at 5:57 PM, ronald simpson <n6gkj1 at gmail.com> wrote:
> 
> OK ... I always assume that ALL modern personal computers in the public domain are SOLID STATE....
> 
>> On Sep 3, 2015 5:56 PM, "ronald simpson" <n6gkj1 at gmail.com> wrote:
>> OK maybe an industrial "tube type"  non-fanless x86 PC
>> 
>>> On Sep 3, 2015 5:47 PM, "Jesse Lloyd" <ve7lyd at gmail.com> wrote:
>>> Lol, no it's a new MSI industrial solid state fanless PC. Designed for use in industrial control settings or vehicular use. 
>>> 
>>> Jesse
>>> 
>>>> On Sep 3, 2015, at 5:40 PM, ronald simpson <n6gkj1 at gmail.com> wrote:
>>>> 
>>>> Maybe a "tube type" x86 pc??
>>>> 
>>>>> On Sep 3, 2015 3:29 PM, "Jesse Lloyd" <ve7lyd at gmail.com> wrote:
>>>>> Ya this is running on solid state x86 PC. I dug around the list a little and I'll have to do a rpt dump and see what's hanging it up, app-rpt or app-voter
>>>>> 
>>>>> I had this happen twice while I was in the asterisk console using voter display, maybe voter display has a bug that causes this, not sure. 
>>>>> 
>>>>> Thx, 
>>>>> 
>>>>> Jesse
>>>>> 
>>>>> 
>>>>> 
>>>>>> On Sep 3, 2015, at 3:15 PM, "kk6ecm" <kk6ecm at gmail.com> wrote:
>>>>>> 
>>>>>> Not sure it's you issue, but I had the same experience on a Beagleboard-xM; kept rebooting, which would last awhile. I finally reseated the microSD memory card, and have not had an issue for many months now. the xM runs on the microSD card.
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> Thanks,
>>>>>> 
>>>>>> Bob
>>>>>> 
>>>>>> kk6ecm
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jesse Lloyd
>>>>>> Sent: Thursday, September 03, 2015 10:58 AM
>>>>>> To: app_rpt
>>>>>> Subject: [App_rpt-users] Stuck Tx on System
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> Hi All,
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> I've been monitoring my system, which consists of 4 RTCM's, and on occasion my Tx gets stuck after someone talks. It goes until it hits the time out timer. I'm viewing voter display x in Asterisk and there is no RTCM's selected and no RSSI shown for all clients so its not a stuck receiver. I have to do /etc/init.d/asterisk restart to kill the stuck PTT condition.
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> Any thoughts on how I should troubleshoot this?
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> Thx,
>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> Jesse
>>>>>> 
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at ohnosec.org
>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>> 
>>>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>> 
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at ohnosec.org
>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> 
>>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150903/680f367b/attachment.html>