[App_rpt-users] RTCM Host LED Flashing

[Tim Sawyer]

Failover is buggy. It ends up connecting to both the primary and the backup
server giving an echo. That's different than you what you were seeing. But
thought I ask anyway.

Could be that the ethernet duplex setting will help. Sometimes that's a
better match to your switch.

On Fri, Sep 4, 2015 at 1:40 PM, Jesse Lloyd <ve7lyd at gmail.com> wrote:

> I did log in remotely, and it flashed debug information regarding loss of
> connectivity to server, then reconnected, then GPS re-lock messages. What I
> did was change the network duplex, and in the hour or so I didn't see any
> more of those messages. So maybd I had a Ethernet duplex mismatch.
>
> Also, I don't have the failover set on that site.
>
> Thx,
> Jesse
>
>
> On Sep 3, 2015, at 7:36 PM, Tim Sawyer <tisawyer at gmail.com> wrote:
>
> Interesting. I've never seen a host LED flash. Do you happen to have the
> fail over feature set?
>
> Can you telnet to the RTCM so you don't have to visit the site? Also, the
> RTCM will log various things to the screen while your are telnet'd in.
> Perhaps that will provice a clew as to what's happening.
>
>
>
> On Thu, Sep 3, 2015 at 9:21 AM, Jesse Lloyd <ve7lyd at gmail.com> wrote:
>
>> Hey All,
>>
>> I have 4 RTCM's setup, two are T/R sites (sites 1&2) and two are Rx only
>> sites (sites 3&4) (Site 1 is the primary site). The systems been running
>> for about 2 months now and one day we noticed that we lost the Tx side of
>> site 2. The Host LED was flashing when we got there to troubleshoot, so we
>> unplugging and re-plugging the network cable (causing the RTCM to reboot)
>> which fixed the issue.  Wondering what I can do to troubleshoot/debug this,
>> and what are the conditions that cause the Host LED to flash?
>>
>> Thanks,
>>
>> Jesse
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> --
> --
> Tim
>
>


-- 
--
Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150904/0418f2cc/attachment.html>