[App_rpt-users] Problem with a post-install on an inactive node(28781)

[Dave Newmyer]

Thanks to both of you for quick replies.  I powered things back up after 
I sent my initial email, and didn't get the error 1 code.  I was able to 
ssh in, and was able to copy the message file out to this machine.

73,

Dave N

N0KM



On 9/7/2015 8:41 PM, Jeff Carrier wrote:
> Hi Dave,
>
> You can also try running K0KN's upgrade script.  Every now and then I 
> have a node act up and that fixes it. http://www.qsl.net/k0kn/scripts.html
>
> If you run nodesetup.sh you should able to re-download your config 
> files too.
>
> On Mon, Sep 7, 2015 at 8:33 PM, kk6ecm <kk6ecm at gmail.com 
> <mailto:kk6ecm at gmail.com>> wrote:
>
>     My experience says asterisk is not happy. Assuming you have gone
>     though the
>     tune process for your URI, it could mean that devstr=a-b in
>     usbradio_tune_xxx does not match the USB address as seen in lsusb,
>     e.g.
>
>     Bus 00a Device 00b: ID 0d8c:013a C-Media Electronics, Inc.
>
>     If that is OK, then I'd check for a typo in one of the asterisk
>     .conf files.
>
>     Bob
>     kk6ecm
>
>     -----Original Message-----
>     From: app_rpt-users-bounces at ohnosec.org
>     <mailto:app_rpt-users-bounces at ohnosec.org>
>     [mailto:app_rpt-users-bounces at ohnosec.org
>     <mailto:app_rpt-users-bounces at ohnosec.org>] On Behalf Of Dave Newmyer
>     Sent: Monday, September 07, 2015 7:09 PM
>     To: app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
>     Subject: [App_rpt-users] Problem with a post-install on an inactive
>     node(28781)
>
>     Hello,
>
>     I have been attempting to get my simplex node back up and running
>     after
>     being off of the air for a couple of years.  The ULI device and radio
>     are the same, but the computer, installation software, ect. are all
>     different. I am using a new install from an acid-centos.iso I
>     downloaded
>     a couple of days ago.
>
>     At post-install,  I get the following:
>     mpg123:no process killed.
>     Asterisk ended with exit status 1
>     Asterisk died with code 1
>     Automatically restarting Asterisk
>
>     This repeats over and over.  I checked the archives, and found a
>     series
>     of postings from someone who had a similar problem some time back.
>     In reading the log file  /var/log/asterisk/messages  the errors
>     refer to
>     a problem with Zaptel.
>
>     One of the suggestions was to update Asterisk from SVN, then
>     update Zaptel.
>
>     After doing this, Asterisk started, and I was able to perform system
>     info and time DTMF commands to my node.
>
>     Later, I tried resetting the computer and after restarting it, I
>     am back
>     to the
>     mpg123:no process killed.
>     Asterisk ended with exit status 1
>     Asterisk died with code  1
>     Automatically restarting Asterisk
>
>     Errors over and over and over again.
>
>     I am thinking that possibly my config files on the AllStar.org website
>     might have an issue, but on one of my re-installs of the software from
>     the cd, I chose not to download the remote configs.
>
>     Anyway, I am not sure what to try next.
>
>     73,
>
>     Dave N
>     N0KM
>
>
>     ---
>     This email has been checked for viruses by Avast antivirus software.
>     https://www.avast.com/antivirus
>
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visit
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>     scroll down to
>     the bottom of the page. Enter your email address and press the
>     "Unsubscribe
>     or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to
>     the list detailing the problem.
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visit
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>     scroll down to the bottom of the page. Enter your email address
>     and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem.
>
>


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus