[App_rpt-users] ACID (Centos 6.7)

[kk6ecm]

P.S. I used a scope on the URIx with this board before, which is how I
initially discovered I could not get the audio to work.

-----Original Message-----
From: kk6ecm [mailto:kk6ecm at gmail.com] 
Sent: Wednesday, September 09, 2015 4:45 PM
To: 'mike at midnighteng.com'; 'app_rpt-users at ohnosec.org'
Subject: RE: [App_rpt-users] ACID (Centos 6.7)


Board - Gigabyte Intel NM70 Chipset HDMI SATA 6Gbps Mini ITX DDR3 1600 Intel
Motherboards GA-C1007UN-D

I was never able to get either ACID CentOS 5.10 or 6.7 to work with this
board. The audio did not work. I used uridiag to test the audio at that
time. The digital portion passed, but not the audio. I've not loaded uridiag
onto th3 ACID CentOS 6.7 build to see if it works.

On 8-17-2015 I burned a CD using acid_centos6 downloaded 9/23/2014
Used the CD to perform a fresh install from a USB CDROM drive, following the
on-screen instructions on 8-17-2015, then left it because I ran out of time.

Today I booted it back up, connected to internet and the URIx. 

Then performed a 'yum update' at the command line

Then fixed Zaptel after the yum update in accordance with
http://docs.allstarlink.org/drupal/node/111

Then hooked up the amplified speaker to the URIx as a baseline test to
confirm the audio still did not work, and IT DID! Audio is clear. 

At least that is what my notes say. I don't remember doing anything else.

Hope this helps,
Bob
kk6ecm

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of mike at midnighteng.com
Sent: Wednesday, September 09, 2015 4:16 PM
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] ACID (Centos 6.7)



Could you say what the chipset and/or board is you installed 0n ?

And did you upgrade the kernal and software ot a fresh install ?

...mike/kb8jnm


> What I'm saying is, it's working. I'm running the URIx, with audio out.
> I've not checked the total interface, but the audio that did not work
> before is working now after a him update and the follow-Zapata repair per
> the allstarlink instructions. Is it possible something got "fixed" with
> the Tim update? What do I need to do the make sure it is fully functional
> besides integrating it with a repeater, which I may have time to do this
> weekend.
>
> Thanks,
> Bob
> kk6ecm
>
> Sent from iPad
>
>
>> On Sep 9, 2015, at 3:39 PM, Jim Duuuude <telesistant at hotmail.com> wrote:
>>
>> The USB and/or audio stuff in Centos 6 is broken.
>>
>> That is why we have never released a Centos 6 based version
>> of ACID.
>>
>> > From: kk6ecm at gmail.com
>> > To: app_rpt-users at ohnosec.org
>> > Date: Wed, 9 Sep 2015 15:20:31 -0700
>> > Subject: [App_rpt-users] ACID (Centos 6.7)
>> >
>> > I decided to try to work on ACID (CentOS 6.7) after several failed
>> attempts
>> > in the past. I loaded up the CD, did a yum update, then fixed zapata.
>> I have
>> > it running now. It seems to work fine with the URIx, and I can connect
>> to
>> > other Allstar nodes. I have the URIx connected to an amplified
>> speaker, and
>> > the audio comes through fine. I am using iaxRPT with it. When I tried
>> to get
>> > it working before, I could not get any of the audio functions working.
>> The
>> > interesting part is I'm running in on a mini-ITX with a newer chipset
>> that I
>> > could never get to work with the current (CentOS 5.10) ACID release.
>> The
>> > digital (i.e. PTT) worked fine, but none of the audio pieces.
>> >
>> > Am I missing something? I'm using the acid_centos6.iso file from
>> 9/23/2014.
>> >
>> > Thanks,
>> > Bob
>> > kk6ecm
>> >
>> > _______________________________________________
>> > App_rpt-users mailing list
>> > App_rpt-users at ohnosec.org
>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> >
>> > To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> > You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message
>> to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.