[App_rpt-users] think I asked wrong..

[Pete M]

Thanks for the info.. If I have 2 node on the same computer do I need to put 
the archivedir=/var/snd argument in both node stanza in rpt.conf or just 
once in the rpt.conf file not in a node stanza?



-----Message d'origine----- 
From: David McGough
Sent: Wednesday, September 30, 2015 9:45 AM
To: Jeff Carrier
Cc: Pete M ; APP RPT
Subject: Re: [App_rpt-users] think I asked wrong..


Until proven otherwise (meaning: you've clearly identified someone
interfering), don't rule out spurious intermod and/or other dirty nearby
transmitters. I've had this exact scenario several times and found some
surprising causes---like a trucker with a very dirty and loud CB radio that
was briefly keying a Kenwood TKR-850 (UHF!!!) even with receive PL tone
enabled! This would happen for several minutes at a time, while he drove
thru the area!

As for logging transmission info, in the repeater stanza in
/etc/asterisk/rpt.conf, try setting the parameter:

archivedir=<directory path to save files>


Then, you'll have a good quality audio and telemetry log of what's going
on. Note that on my systems, I've made a new directory using (from the
command prompt):

mkdir /var/snd
chmod 1777 /var/snd

Then, in rpt.conf I've got:

archivedir=/var/snd


Good luck chasing the interference. Persistence pays off.

73, David KB4FXC




On Wed, 30 Sep 2015, Jeff Carrier wrote:

> I usually just remotely change the input ctcss tone and they usually
> disappear.
>
> On Wed, Sep 30, 2015 at 7:03 AM, Pete M <petem001 at hotmail.com> wrote:
>
> > Hi.
> >
> > We have someone on the repeater doing multiple small tx on a random
> > pattern (this can last 10 minute at a time) so all we ear is the 
> > telemetry
> > of the repeater and it kind of get on the nerve of many.
> >
> > We did lower the audio level of the telemetry were we almost dont ear 
> > it,
> > yet the bozo continu on tx ing short (less then a second) ptt..
> >
> > We are building some DDDF ( digital Doppler direction finder)  that will
> > monitor the input freq of our 2 repeater and will logs the bearing of at
> > least 4 of them on a central server with time stamps..
> >
> > I need a way to extract from asterisk when someone do make a lots of 
> > short
> > ptt and compare them to the logs from our DDDF. that way after some data
> > collection we will see if the offender is on the move or mostly at the 
> > same
> > place. and at the same time we will see if it is random or if there is 
> > some
> > kind of pattern in time so that we will be able to find the offender and
> > finally be done with it.. this been going on for years..
> >
> > Anyone can point me ia way to extract such data from asterisk ? or find 
> > a
> > way with action command to put that kind of stuff in a file?
> >
> > Thanks
> >
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> > down
> > to the bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message 
> > to
> > the list detailing the problem.
> >
>