[App_rpt-users] Allstar Stats Server

Loren Tedford lorentedford at gmail.com
Wed Apr 27 04:58:56 UTC 2016


yea.. the Stats server has been down now for a couple of days at least..

Loren Tedford (KC9ZHV)
Email: lorentedford at gmail.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://www.newwavesucks.com
http://forum.newwavesucks.com

On Tue, Apr 26, 2016 at 11:24 PM, Steve Agee <n5zua at earthlink.net> wrote:

> I believe if you will check back through your previous messages from
> earlier today or last night that it has been well documented on this list
> that the server will be up and down.
>
> N5ZUA
>
> On 4/26/2016 11:17 PM, KM4NRJ FLORIDA wrote:
>
> Am I missing something or is the Allstar Stats server been offline lately.
> Cannot reach it to obtain node statuses and bubble maps.
>
> 73s
>
> Chuck
> KM4NRJ
> On Apr 26, 2016 12:00 PM, < <app_rpt-users-request at ohnosec.org>
> app_rpt-users-request at ohnosec.org> wrote:
>
> Send App_rpt-users mailing list submissions to
>         app_rpt-users at ohnosec.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
>         app_rpt-users-request at ohnosec.org
>
> You can reach the person managing the list at
>         app_rpt-users-owner at ohnosec.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
>
>
> Today's Topics:
>
>    1. Re: Play two audio files back to back (David McGough)
>    2. Re: Play two audio files back to back (Steve Mahler)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 26 Apr 2016 07:51:32 -0400 (EDT)
> From: David McGough <kb4fxc at inttek.net>
> To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Play two audio files back to back
> Message-ID:
>         <Pine.LNX.4.44.1604260747210.7079-100000 at goliath.inttek.net>
> Content-Type: TEXT/PLAIN; charset=ISO-8859-1
>
>
> I think the playback command only takes a single audio filename.
>
>
> Try this approach:
>
> cat /var/lib/asterisk/sounds/tide.gsm > /tmp/temp.gsm
> cat /var/lib/asterisk/sounds/times.gsm >> /tmp/temp.gsm
> cat /var/lib/asterisk/sounds/will-expire.gsm >> /tmp/temp.gsm
> cat /var/lib/asterisk/sounds/at-any-time.gsm >> /tmp/temp.gsm
>
> asterisk -rx "rpt playback $node /tmp/temp"
>
> rm -f /tmp/temp.gsm
>
>
> Note that once these audio segments are cat'ed together, a final call to
> sox can be used to change levels, formats, etc., if needed.
>
> 73, David KB4FXC
>
>
>
> On Tue, 26 Apr 2016, kk6ecm wrote:
>
> > Hmmm ...  appears to be a mix of two syntaxes, and you may not achieve
> your goal...
> >
> > Xxxxxxx*CLI> help rpt playback
> > Usage: rpt playback <nodename> <sound_file_base_name>
> >        Send an Audio File to a node, send to all other connected nodes
> (global)
> >
> >             (seems there used to be a <delay> as a third variable)
> >
> > and
> >
> > playback, file&file1 on the current node, where the concatenated files
> are joined with the &, no spaces.
> >
> > I'm wondering... set delay to 0... not sure if there is a default, or
> even if it is still a feature.
> >
> > e.g.
> >
> > >> asterisk -rx "rpt playback $node channel 0"
> > >> > asterisk -rx "rpt playback $node digits/$chan 0"
> >
> > Thanks,
> > Bob
> > kk6ecm
> > 73
> >
> > Sent from iPad
> >
> >
> > > On Apr 25, 2016, at 9:26 PM, Skyler F < <electricity440 at gmail.com>
> electricity440 at gmail.com> wrote:
> > >
> > > Small Problem:
> > >
> > > rpt playback 42622 channel&channel
> > >
> > > ast_streamfile: Unable to open channel&channel
> > >
> > > 73
> > >
> > > Skyler
> > >
> > >
> > >> On Mon, Apr 25, 2016 at 10:23 PM, kk6ecm < <kk6ecm at gmail.com>
> kk6ecm at gmail.com> wrote:
> > >>  Leading and trailing spaces with the & are not tolerated.
> > >> e.g filename&filename2 OK
> > >> filename & filename2 Not OK
> > >>
> > >> Thanks,
> > >> Bob
> > >> kk6ecm
> > >> 73
> > >>
> > >> Sent from iPad
> > >>
> > >>
> > >> > On Apr 25, 2016, at 8:13 PM, Skyler F < <electricity440 at gmail.com>
> electricity440 at gmail.com> wrote:
> > >> >
> > >> > I am currently writing scripts for my remote base, and am working
> on the channel switch acknowledgment.
> > >> >
> > >> > Here is what I am currently doing:
> > >> >
> > >> > asterisk -rx "rpt playback $node channel"
> > >> > asterisk -rx "rpt playback $node digits/$chan"
> > >> >
> > >> > This works well for my 16 channel radio, but I am annoyed by the
> amount of space between the audio files.
> > >> >
> > >> > I tried stuff like
> > >> >
> > >> > asterisk -rx "rpt playback $node channel & digits/$chan"
> > >> >
> > >> > but I just get a syntax error.
> > >> >
> > >> > Does anybody know the solution to get the audio files to play back
> to back like they do when AllStar announces node connections etc?
> > >> >
> > >> > 73
> > >> > Skyler KD??WHB\
> > >> > _______________________________________________
> > >> > App_rpt-users mailing list
> > >> > App_rpt-users at ohnosec.org
> > >> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >> >
> > >> > To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> > >> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> > >
> > >
> > >
> > > --
> > > Skyler Fennell
> > > amsatnet.info
> > > KD??WHB
> > > electricity440 at gmail.com
> >
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 26 Apr 2016 07:08:11 -0500
> From: Steve Mahler <kizzy at lusfiber.net>
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Play two audio files back to back
> Message-ID: <571F5A2B.4050307 at lusfiber.net>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> Or, if you are using WAV files ... catwav them (which uses sox) and play
> the result ...
>
> /bin/rm -f  $WXT/$TEMPMSG       #Make filename available for output
> /usr/local/bin/catwav $WXT/$TAILMSG  $WXA/${P1}${P2}${P3} $WXT/$TEMPMSG
> /bin/rm -f  $WXT/$TAILMSG       #Make filename available for output
> /usr/local/bin/catwav $WXT/$TEMPMSG  $WXA/spc.wav $WXT/$TAILMSG
>
> You would do the asterisk -rx " rpt localplay NODE cattedfile" here (I
> use it to build tailmessages with multiple announcements).
>
> ...STeve - KF5VH
>
>
>
> On 4/26/2016 6:51 AM, David McGough wrote:
> > I think the playback command only takes a single audio filename.
> >
> >
> > Try this approach:
> >
> > cat /var/lib/asterisk/sounds/tide.gsm > /tmp/temp.gsm
> > cat /var/lib/asterisk/sounds/times.gsm >> /tmp/temp.gsm
> > cat /var/lib/asterisk/sounds/will-expire.gsm >> /tmp/temp.gsm
> > cat /var/lib/asterisk/sounds/at-any-time.gsm >> /tmp/temp.gsm
> >
> > asterisk -rx "rpt playback $node /tmp/temp"
> >
> > rm -f /tmp/temp.gsm
> >
> >
> > Note that once these audio segments are cat'ed together, a final call to
> > sox can be used to change levels, formats, etc., if needed.
> >
> > 73, David KB4FXC
> >
> >
> >
> > On Tue, 26 Apr 2016, kk6ecm wrote:
> >
> >> Hmmm ...  appears to be a mix of two syntaxes, and you may not achieve
> your goal...
> >>
> >> Xxxxxxx*CLI> help rpt playback
> >> Usage: rpt playback <nodename> <sound_file_base_name>
> >>         Send an Audio File to a node, send to all other connected nodes
> (global)
> >>
> >>              (seems there used to be a <delay> as a third variable)
> >>
> >> and
> >>
> >> playback, file&file1 on the current node, where the concatenated files
> are joined with the &, no spaces.
> >>
> >> I'm wondering... set delay to 0... not sure if there is a default, or
> even if it is still a feature.
> >>
> >> e.g.
> >>
> >>>> asterisk -rx "rpt playback $node channel 0"
> >>>>> asterisk -rx "rpt playback $node digits/$chan 0"
> >> Thanks,
> >> Bob
> >> kk6ecm
> >> 73
> >>
> >> Sent from iPad
> >>
> >>
> >>> On Apr 25, 2016, at 9:26 PM, Skyler F < <electricity440 at gmail.com>
> electricity440 at gmail.com> wrote:
> >>>
> >>> Small Problem:
> >>>
> >>> rpt playback 42622 channel&channel
> >>>
> >>> ast_streamfile: Unable to open channel&channel
> >>>
> >>> 73
> >>>
> >>> Skyler
> >>>
> >>>
> >>>> On Mon, Apr 25, 2016 at 10:23 PM, kk6ecm < <kk6ecm at gmail.com>
> kk6ecm at gmail.com> wrote:
> >>>>   Leading and trailing spaces with the & are not tolerated.
> >>>> e.g filename&filename2 OK
> >>>> filename & filename2 Not OK
> >>>>
> >>>> Thanks,
> >>>> Bob
> >>>> kk6ecm
> >>>> 73
> >>>>
> >>>> Sent from iPad
> >>>>
> >>>>
> >>>>> On Apr 25, 2016, at 8:13 PM, Skyler F <electricity440 at gmail.com>
> wrote:
> >>>>>
> >>>>> I am currently writing scripts for my remote base, and am working on
> the channel switch acknowledgment.
> >>>>>
> >>>>> Here is what I am currently doing:
> >>>>>
> >>>>> asterisk -rx "rpt playback $node channel"
> >>>>> asterisk -rx "rpt playback $node digits/$chan"
> >>>>>
> >>>>> This works well for my 16 channel radio, but I am annoyed by the
> amount of space between the audio files.
> >>>>>
> >>>>> I tried stuff like
> >>>>>
> >>>>> asterisk -rx "rpt playback $node channel & digits/$chan"
> >>>>>
> >>>>> but I just get a syntax error.
> >>>>>
> >>>>> Does anybody know the solution to get the audio files to play back
> to back like they do when AllStar announces node connections etc?
> >>>>>
> >>>>> 73
> >>>>> Skyler KD??WHB\
> >>>>> _______________________________________________
> >>>>> App_rpt-users mailing list
> >>>>> App_rpt-users at ohnosec.org
> >>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>>>
> >>>>> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> >>>>> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >>>
> >>>
> >>> --
> >>> Skyler Fennell
> >>> amsatnet.info
> >>> KD??WHB
> >>> electricity440 at gmail.com
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >
>
>
>
>
> ------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> End of App_rpt-users Digest, Vol 86, Issue 62
> *********************************************
>
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160426/f4cc7574/attachment.html>


More information about the App_rpt-users mailing list