[App_rpt-users] simple udp interface

[David Krauss]

what is the format of the data ? is there a header or something to indicate PTT or does it just use the fact data is coming in and timeout after it stops.  Is there a way to set what codec is used in the channel ?  thanks 

Sent from an iPhone 6

> On Apr 29, 2016, at 5:57 PM, Steve Zingman <szingman at msgstor.com> wrote:
> 
> Look at the usrp channel driver
> 
> 
> 
> Sent via smoke signal (AT&T 4G LTE)
> 
> 
> -------- Original message --------
> From: David Krauss <nx4y at verizon.net> 
> Date: 04/29/2016 5:55 PM (GMT-05:00) 
> To: app_rpt-users at ohnosec.org 
> Subject: [App_rpt-users] simple udp interface 
> 
> Is there a simple way to connect to asterisk/allstar via a udp socket ? I have a source of network audio that can source and receive raw PCM, 64K, 8 bit. I've looked at the rtpdir and  outbound-only RTSP drivers but can't quite figure out how they really work, at least not quickly,  and I was hoping someone already has this .. it needs to support COS and PTT signaling as well of course ..
> 
> Sent from an iPhone 6
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160429/1c64bb9e/attachment.html>