[App_rpt-users] SimpleUSB gpio?

[mike at midnighteng.com]

Sorry,
I do have to ask the obvious,
Are you sure you are testing the output correctly ?
I believe these FLOAT and switch to ground when active.
Just like a parallel port.Don't use them so I don't know for sure.
So you need to check continuity between ground and the pin in question for activity.

...mike/kb8jnm

> I'm trying to manipulate a GPIO pin off of a URIx and I am not able to get
> it to work for whatever reason. If I send a cop,62 command to toggle it, it
> does not change the state.
>
> I found this message from Jim that was posted in June 2011:
>
> http://ohnosec.org/pipermail/app_rpt-users/2011-June/002725.html
>
> Does anyone know if this was ever implemented? This was quite some time
> ago.
>
> I might be able to use usbradio instead for my application, but prefer
> SimpleUSB as it's easier to implement.
>
> 73
> Stephen
> K1LNX
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If
> you have trouble unsubscribing, please send a message to the list detailing the
> problem.