[App_rpt-users] RX/TX on DIAL

[Steve Zingman]

Josh,
I have not tried it with the port.
Some things I can think of to check:
do you have /dev/parport0
try setting invertptt = 1 Does the transmitter key? as soon as asterisk 
starts?

Steve

On 02/15/2016 09:12 PM, Josh W4ZZK wrote:
> Evening all
>
> Would appreciate a little insight to an issue here. Perhaps this is 
> very simple.
>
> Have the DIAL box pretty much "good to go" with the USB FOB, cabling 
> from a M120 Motorola, within the hood of a DB25 is a 4n33 Opto for 
> keying the rig with PP2 (and using PP10 as COR).
>
> To test some abilities, I've gotten Echolink enabled on the node, and 
> have RX audio from the radio through the computer to echolink, as well 
> as over the phone to the Portal. This part seems to be just fine. 
> Unfortunately, the computer is not sending signal to TX. I have 
> "simpleusb.conf" configured with:
>
> pp2=ptt
> pp10=cor
>
> Have I missed something simple in addressing the machine to use pp2 
> and pp10 for rig control, rather than USB FOBs onboard points?
>
> Again, this is new... bear with me as I learn the ropes!
>
> Thanks!
> Josh, W4ZZK
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160215/bfee8a2d/attachment.html>