[App_rpt-users] Remote Commands

[Bryan D. Boyle]

i would write a bash script to do it and call it with a command from dtmf.

lots of examples in the archives; you just need to put a pause in between the *4nodenumber and the command you are passing to it.
--
Bryan
Sent from my iPhone 6S...No electrons were harmed in the sending of this message.



> On Feb 25, 2016, at 20:15, Bob <Bob at Fot.com.au> wrote:
> 
> Hi Gurus
> 
> I am trying to make a second node I control to connect to another node ....
> 
> I am sending from the CLI
> 
> rpt cmd 28608 ilink 4,42332 *342321
> 
> The node I am on is 28608
> The node I wish to issue the connect from is 42342
> And I want to connect to 42321
> 
> Is this possible ??
> 73
> Bob
> VK6ZGN
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160225/246c7ce7/attachment.html>