[App_rpt-users] VPN or other option?

[Justin Harris]

That's a good option too. :-)

Take care,
Justin Harris
KG7FKJ

> On Jan 4, 2016, at 7:02 PM, Steve Agee <n5zua at earthlink.net> wrote:
> 
> That has been my experience, as long as the portable node has valid DNS working in order to register. If not, you *could* (not necessarily recommended, but it would work) edit /etc/asterisk/iax.conf:
> remove = register=2433:123456 at register.allstarlink.org
> replace with = register=2433:123456 at 67.215.233.178
> 
> N5ZUA
> 
>> On 1/4/2016 8:48 PM, Robert Newberry wrote:
>> Hopefully not muddying the water here. If you didn't have a VPN going and you did plug into the EOC network and got a IP thru DHCP. Your node would work just fine, just no one would be able to connect to you. You would however be able to connect out. Do I have that right, I only ask  because I'm building a transportable node myself.
>> 
>> N1XBM
>> Apparare Scientor
>> Paratus Communicare
>> Allstar Node # 27086, 41540, 41812
>> 
>>> On Jan 4, 2016 9:42 PM, "Tower DIVA" <tower.diva at gmail.com> wrote:
>>> I am hoping to have a transportable node that could, for and example, Be taken to the local Emergency Operations Center and plugged into their network for internet access.  Granted the IT department is not going to just let me sneak into their system to "modify" it.  My thoughts are to be                   able to set it to where when its powered and gets its DHCP from their network, it sets up a VPN to my house cisco router and that way it would be able to pass the proper port info through the VPN to the node.  
>>> Did I explain within reason?
>>> 
>>> I appreciate all your help,
>>> 
>>> Mrs Keri Varela
>>> 
>>> 
>>>> On Mon, Jan 4, 2016 at 7:35 PM, Leon Zetekoff <wa4zlw at arrl.net> wrote:
>>>> Vpn tunnels are great to extend your lan.
>>>> 
>>>> What are you trying to do?
>>>> 
>>>> 73 Leon wa4zlw
>>>> 
>>>> Sent from my Sprint Phone.
>>>> 
>>>> ----- Reply message -----
>>>> From: "Tower DIVA" <tower.diva at gmail.com>
>>>> To: <app_rpt-users at ohnosec.org>
>>>> Subject: [App_rpt-users] VPN or other option?
>>>> Date: Mon, Jan 4, 2016 8:43 PM
>>>> 
>>>> Is it possible to set a portable node up to where you do not have to access the router and do port forwarding where you connect it to be able to gain operability?   Could a VPN be set to do tunneling to say, your home QTH and bypass this step?    I have not done any VPN work in linux.    
>>>> Thanks for any help!!!
>>>> Keri 
>>>> KB0YNA
>>>> Mesa County, Colorado RACES
>>> 
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160104/663beadb/attachment.html>