[App_rpt-users] Dial on RPi - recompile after updates

[David Osborn]

Thank you so much for the swift response, Steve. That's really appreciated.
Unfortunately it's still in the wars :-(

root at pi_repeater:/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete# make clean
make -C linux clean
make[1]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make -C drivers/dahdi/firmware clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/firmwar
e'
rm -f dahdi-fw-*.o
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/firmwar
e'
make -C
M='/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/oct61
2x' clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make[2]: ***
M=/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/oct612
x: No such file or directory.  Stop.
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:179: recipe for target 'clean' failed
make[1]: *** [clean] Error 2
make[1]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:14: recipe for target 'clean' failed
make: *** [clean] Error 2

I fell at the first hurdle. The directory oct612x does exist, however, and
it contains files.

Any thoughts?


-----Original Message-----
From: Steve Zingman [mailto:szingman at msgstor.com] 
Sent: 09 January 2016 14:51
To: David Osborn; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates

David,
cd /usr/src/astsrc-1.4.23-pre/dahdi-linux-complete
make clean
make all
make install
make config

73, Steve N4IRS

On 01/09/2016 09:46 AM, David Osborn wrote:
> Hi all,
>
> I downloaded and installed the DIAL image for the RPi2 and it went in 
> a treat. Great work guys!
>
> What I did next broke it, but it is something that we all have to do 
> and I've done it many times with my Acid installs: I did an update to 
> the system.
>
> Just as with Acid, the updates broke Asterisk and it craps out after a 
> few
> tries:
>
> [Jan  9 14:34:48] WARNING[300] chan_dahdi.c: Unable to open
> '/dev/dahdi/pseudo': No such file or directory [Jan  9 14:34:48] 
> ERROR[300] chan_dahdi.c: Unable to dup channel: No such file or 
> directory [Jan  9 14:34:48] WARNING[301] chan_simpleusb.c: File 
> simpleusb_tune_usb.conf not found, device usb using default parameters.
> [Jan  9 14:34:50] ERROR[269] app_rpt.c: Continual RPT thread restarts, 
> killing Asterisk
>
> I am guessing that Asterisk etc needs to be re-compiled. How do I go 
> about this? I tried running the rpi2 install script at 
> https://github.com/N4IRS/AllStar and answered "n" to repeated queries 
> about patches. Compilation appeared to succeed, but Asterisk still dies on
me.
>
> Thanks again for the work on this. I'm most impressed with the RPI2!
>
> David Osborn
> GD4HOZ
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button"
> You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.

--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic